0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor

In Stock
$399.98
SKU:
MZ19020102
Condition:
New
Warranty:
5/1 Years
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
  • 0.35X-2.25X LED Industrial Inspection Video Zoom Microscope, Post Stand + Digital Camera + 8 in. Monitor
Quick Overview
Finite. Total Magnification: 0.35-2.25X. 1X Objective. Standard Coupler: 0.5X. Zoom Ratio: 1:6.4. Stand Type: Post Stand. Illumination Type: LED Reflection Light. Light Adjustable. CMOS. 2.0 Megapixels. VGA. Screen Size: 8in. Monitor Input Signal Format: BNC/VGA. Input Voltage: AC 100-240V 50/60Hz. Input Voltage: AC 110-240V 50/60Hz. Input Voltage: DC 12V. VGA Color Digital Camera,8” LCD Color Monitor,Monitor Holder,LED Ring Light.

Suggested Applications
Medical & Microbiology , Medical Devices

MZ19020102 Video Zoom Microscope
Optical System Specifications
Optical SystemFinite
System Optical Magnification0.35-2.25X
Expandable System Optical Magnification (Optional Parts Required)0.0857-9X
Total Magnification0.35-2.25X
Standard Objective1X Objective
Standard Coupler0.5X
System Field of View Dia. 2.2-14.2mm
System Working Distance100mm
Zoom Lens Body
Video Zoom Body
Body Optical SystemFinite
Body Magnification0.7-4.5X
Zoom Range0.7-4.5X
Zoom Ratio1:6.4
Zoom Operating ModeWith the Nosepiece
Body Mounting Size for Stand Dia. 50mm
Body Mount Type for CouplerFastening Screw
Body Mount Size for Coupler Dia. 27mm
Nosepiece Adapter Size for Ring Light Dia. 46mm
Objective Screw ThreadM42x0.75mm
Surface TreatmentElectroplating Black
MaterialMetal
ColorBlack
Net Weight0.42kg (0.93lbs)
Post Stand
50mm Post Stand
Stand TypePost Stand
Holder Adapter Type Dia. 50mm Scope Holder
Vertical Post Height280mm
Vertical Post Diameter Dia. 25mm
Base TypeTable Base
Base ShapeRectangle
Base Dimensions380x260x20mm
Focus ModeManual
Focus Distance60mm
Coarse Focus Distance per Rotation26mm
Center Distance from Hole to Scope Holder150mm
Surface TreatmentElectroplating Black
MaterialMetal
ColorBlack
Net Weight3.56kg (7.85lbs)
Dimensions380x260x370mm (14.961x10.236x14.567 in. )
Focus Rack
50/25mm Through Hole Focus Rack
Holder Adapter Type Dia. 50mm Scope Holder
Focus ModeManual
Coarse/Fine Focus TypeCoarse Focus
Focus Distance60mm
Coarse Focus Distance per Rotation30mm
Post Hole Diameter of Focusing Rack Dia. 25mm
Center Distance from Hole to Scope Holder142mm
Surface TreatmentSpray Paint
MaterialMetal
ColorBlack
Net Weight0.85kg (1.87lbs)
Monitor Holder
Post Hole Diameter of Focusing Rack Dia. 25mm
Load for MonitorSmaller than 10 in. Monitor
Mounting Position for MonitorHorizontal Bar
Mounting Type of MonitorFixed
Surface TreatmentElectroplating
MaterialMetal
ColorBlack
Net Weight0.28kg (0.62lbs)
Microscope Illuminator
Illumination TypeLED Reflection Light
Top Illumination TypeLED
Coupler/C-mount Adapter
0.5X Coupler
Coupler Mount Type for BodyFastening Screw
Coupler Mount Size for Body Dia. 27mm
Adjustable CouplerAdjustable
Coupler for Microscope TypeVideo Zoom Lens Compatible
Coupler Magnification0.5X
For Camera Sensor SizeUnder 1/3 in.
C/CS-Mount CouplerC-Mount
Surface TreatmentElectroplating Black
MaterialMetal
ColorBlack
Net Weight0.11kg (0.24lbs)
Applied FieldFor MZ1902 Series Video Zoom Body
VGA Digital Camera
2M VGA Color Digital Camera
Image SensorCMOS
Image Sensor Size1/2.7 in.
Camera Maximum Pixels2.0 Megapixels
Camera Resolution1920x1080
Camera Signal Output PortVGA
Camera Lens MountC-Mount
Transmission Frame Rate30fps
White BalanceManual/Auto
Image Freeze FunctionImage Freeze
Number of Crosshairs8 Movable Lines
LanguageEnglish/Chinese (Simplified)
Camera Housing MaterialMetal
Camera Housing Size65x52x52mm
Camera Housing ColorBlack
Input VoltageDC 12V
Surface TreatmentElectroplating
MaterialMetal
ColorBlack
Net Weight0.14kg (0.31lbs)
TFT-LCD Monitor
8” LCD Color Monitor
Screen Size8in
Screen Aspect Ratio4:3
Monitor Input Signal FormatBNC/VGA
Monitor Signal FormatNTSC/PAL Auto-Switch
Screen BacklightLCD
Monitor Operating Temperature10°C~40°C
Monitor Operating Humidity10%-80%
Monitor Housing MaterialPlastic
Monitor Housing Size205x160x40mm
Monitor Housing ColorBlack
Input VoltageAC 100-240V 50/60Hz
Output VoltageDC 12V
Net Weight0.65kg (1.43lbs)
Other Parameters
Surface TreatmentSpray Paint
MaterialMetal
ColorBlack, White
Net Weight4.02kg (8.86lbs)
NotesVGA Color Digital Camera,8” LCD Color Monitor,Monitor Holder,LED Ring Light
Series
MZ1902MZ19020102

 


Technical Info

Instructions
Video Zoom LensClose Λ
Video zoom lens, refers to microscope that has only one set of imaging optical paths. It can be considered as a set of dual optical path stereo microscopes. The magnification and multiple range of video zoom lens are usually the same as those of a stereo microscope, but because the objective lens is one, its optical imaging is flat, not stereoscopic.

It has been observed that as most of the parametric features are close to stereo microscopes, video zoom lens is then classified as stereo microscope. In fact, it lacks the most important "stereoscopic" imaging features. Compared with other compound microscopes such as biological metallurgical microscopes, the total optical magnification of video zoom lens is generally below 40X, which is the coverage of low magnification range that these microscopes do not have.

Most of the video continuous zoom lens is to observe the electronic image, not through the eyepiece, but through the camera.
Video zoom lens can have relatively more objective lens and photographic eyepiece multiples for selection. At the same time, video zoom lens can also be designed as parallel light so as to add even more configuration accessories, such as observation eyepieces, aperture diaphragms, coaxial illumination light sources, reticles, and nosepieces that can change the viewing angle and direction, etc.
Regarding accessories of video zoom lens such as the stands and light source etc., generally, all accessories of stereo microscope can be used. Therefore, video zoom lens combination is flexible, compact, with strong adaptability and low cost, suitable for use in industry, especially extensively used in the electronics industry.
FiniteClose Λ
Microscopes and components have two types of optical path design structures.
One type is finite optical structural design, in which light passing through the objective lens is directed at the intermediate image plane (located in the front focal plane of the eyepiece) and converges at that point. The finite structure is an integrated design, with a compact structure, and it is a kind of economical microscope.
Another type is infinite optical structural design, in which the light between the tube lens after passing the objective lens becomes "parallel light". Within this distance, various kinds of optical components necessary such as beam splitters or optical filters call be added, and at the same time, this kind of design has better imaging results. As the design is modular, it is also called modular microscope. The modular structure facilitates the addition of different imaging and lighting accessories in the middle of the system as required.
The main components of infinite and finite, especially objective lens, are usually not interchangeable for use, and even if they can be imaged, the image quality will also have some defects.

The separative two-objective lens structure of the dual-light path of stereo microscope (SZ/FS microscope) is also known as Greenough.
Parallel optical microscope uses a parallel structure (PZ microscope), which is different from the separative two-object lens structure, and because its objective lens is one and the same, it is therefore also known as the CMO common main objective.
System Optical MagnificationClose Λ
The magnification of the objective lens refers to the lateral magnification, it is the ratio of the image to the real size after the original image is magnified by the instrument. This multiple refers to the length or width of the magnified object.
System optical magnification is the product of the eyepiece and the objective lens (objective lens zoom set) of the optical imaging part within the system.
Optical magnification = eyepiece multiple X objective lens/objective lens set

The maximum optical magnification of the microscope depends on the wavelength of the light to which the object is illuminated. The size of the object that can be observed must be greater than the wavelength of the light. Otherwise, the light cannot be reflected or transmitted, or recognized by the human eye. The shortest wavelength of ultraviolet light is 0.2 microns, so the resolution of the optical microscope in the visible range does not exceed 0.2 microns, or 200 nanometers. This size is converted to the magnification of the microscope, and it is the optical magnification of 2000X. Usually, the compound microscope can achieve 100X objective lens, the eyepiece is 20X, and the magnification can reach 2000X. If it is bigger, it will be called "invalid magnification", that is, the image is large, but the resolution is no longer increased, and no more details and information can be seen.
Total MagnificationClose Λ
Total magnification is the magnification of the observed object finally obtained by the instrument. This magnification is often the product of the optical magnification and the electronic magnification.
When it is only optically magnified, the total magnification will be the optical magnification.

Total magnification = optical magnification X electronic magnification
Total magnification = (objective X photo eyepiece) X (display size / camera sensor target )
System Field of ViewClose Λ
Field of View, is also called FOV.
The field of view, or FOV, refers to the size of the object plane (i.e., the plane of the point of the observed object perpendicular to the optical axis), or of its conjugate plane (i.e., object to primary image distance), represented by a line value.
System field of view is the size of the actual diameter of the image of the terminal display device of the instrument, such as the size of the image in the eyepiece or in the display.

Field of view number refers to the diameter of the field diaphragm of the objective lens, or the diameter of the image plane formed by the field diaphragm.
Field of view number of objective lens = field of view number of eyepiece / (objective magnification / mechanical tube length)

Large field of view makes it easy to observe the full view and more range of the observed object, but the field of view (FOV) is inversely proportional to the magnification and inversely proportional to the resolution, that is, the larger the field of view, the smaller the magnification, and also the lower the resolution of the object to be observed.
There are usually two ways to increase the field of view, one is to replace with an objective lens of a smaller multiple, or to replace with an eyepiece of a smaller multiple.
System Working DistanceClose Λ
Working distance, also referred to as WD, is usually the vertical distance from the foremost surface end of the objective lens of the microscope to the surface of the observed object.
When the working distance or WD is large, the space between the objective lens and the object to be observed is also large, which can facilitate operation and the use of corresponding lighting conditions.
In general, system working distance is the working distance of the objective lens. When some other equipment, such as a light source etc., is used below the objective lens, the working distance (i.e., space) will become smaller.

Working distance or WD is related to the design of the working distance of the objective lens. Generally speaking, the bigger the magnification of the objective lens, the smaller the working distance. Conversely, the smaller the magnification of the objective lens, the greater the working distance.
When it is necessary to change the working distance requirement, it can be realized by changing the magnification of the objective lens.
Zoom RangeClose Λ
Zoom in zoom microscope means to obtain different magnifications by changing the focal length of the objective lens within a certain range through adjustment of some lens or lens set while not changing the position of the object plane (that is, the plane of the point of the observed object perpendicular to the optical axis) and the image plane (that is, the plane of the image imaging focus and perpendicular to the optical axis) of the microscope.
Zoom range refers to the range in which the magnification is from low to high. In the zoom range of the microscope, there is no need to adjust the microscope knob for focusing, and ensure that the image is always clear during the entire zoom process.
The larger the zoom range, the stronger the adaptability of the range for microscope observation, but the image effects at both ends of the low and high magnification should be taken into consideration, the larger the zoom range, the more difficult to design and manufacture, and the higher the cost will be.
Zoom RatioClose Λ
Zoom ratio is the ratio of the maximum magnification / the minimum magnification. Expressed as 1: (ratio of maximum magnification / minimum magnification). If the maximum magnification is 4.5X, the minimum magnification is 0.7X, then the zoom ratio = 4.5 / 0.7 = 6.4, the zoom ratio will be 1:6.4.
Zoom ratio is obtained by the intermediate magnification group of the microscope. When the magnification is increased or decreased by using other objective lenses, the zoom ratio does not change accordingly.
With the NosepieceClose Λ
When the microscope body changes the magnification, it is realized by adjusting the zoom drum or nosepiece. Generally, the lower case of the microscope is used as the zoom drum or nosepiece. When magnification conversion is required, it can be realized by turning the zoom drum or nosepiece.
Objective Screw ThreadClose Λ
For microscopes of different manufacturers and different models, the thread size of their objectives may also be different.
In general, the objective threads are available in two standard sizes, allowing similar objectives between different manufacturers to be used interchangeably.
One is the British system: RMS type objective thread: 4/5in X 1/36in,
One is metric: M25 X 0.75mm thread.
Post StandClose Λ
Post stand generally has relatively tall post. When the focus is adjusted, the focusing mechanism can slide up and down the post, the microscope is thus placed in an approximately focused position, and then the focusing mechanism makes fine and accurate adjustment. This kind of stand can move quickly, and is suitable for viewing objects with a higher height and bigger volume.
After the microscope is mounted, the microscope imaging center needs to be aligned with the center of the platen.
The focusing mechanism button on the post must be tightened to lock the guard ring device, and the microscope should be prevented from loosening and shaking when working. When it is necessary to adjust the height, hold the microscope and the focusing mechanism with one hand, then release the knob, adjust it to the proper position, lock the knob, then top the guard ring to the lower position of the focusing mechanism, and lock it tight. In particular, avoid accidental dropping of the microscope due to gravity, thereby damaging the microscope and the objects below.
Focus RackClose Λ
Focus rack is the focusing mechanism that connects the microscope, with one end connected to the post of the microscope stand to adjust the up and down movement of the microscope for focusing.
The front end of the focus rack can also be used to connect microscopes or cameras of different diameters by changing the scope holder.
Coupler/C-mount AdapterClose Λ
Coupler/C-mount adapter is an adapter commonly used for connection between the C-adapter camera (industrial camera) and a microscope.
Adjustable CouplerClose Λ
On the coupler/C-mount-adapter, there is an adjustable device to adjust the focal length.
Coupler for Microscope TypeClose Λ
Different coupler/C-mount-adapters are suitable for different microscopes. For some, some adapter accessories need to be replaced. See the applicable range of each coupler/C-mount-adapter for details.
Coupler MagnificationClose Λ
Coupler magnification refers to the line field magnification of the coupler/C-mount-adapter. With different magnifications of the adapter lens, images of different magnifications and fields of view can be obtained. The size of the image field of view is related to the sensor size and the coupler/C-mount-adapter magnification.

Camera image field of view (mm) = sensor diagonal / coupler/C-mount-adapter magnification.

For example: 1/2 inch sensor size, 0.5X coupler/C-mount-adapter coupler, field of view FOV (mm) = 8mm / 0.5 = 16mm.
The field of view number of the microscope 10X eyepiece is usually designed to be 18, 20, 22, 23mm, less than 1 inch (25.4mm). Since most commonly used camera sensor sizes are 1/3 and 1/2 inches, this makes the image field of view on the display always smaller than the field of view of the eyepiece for observation, and the visual perception becomes inconsistent when simultaneously viewed on both the eyepiece and the display. If it is changed to a 0.5X coupler/C-mount-adapter, the microscope image magnification is reduced by 1/2 and the field of view is doubled, then the image captured by the camera will be close to the range observed in the eyepiece.
Some adapters are designed without a lens, and their optical magnification is considered 1X.
For Camera Sensor SizeClose Λ
For the size of the lens field of view of the coupler/C-mount-adapter, in the design process, the size of the camera sensor imaging target should be considered. When the field of view of the lens is smaller than the target plane of the camera, “black border” and “dark corner” will appear.
The general microscope coupler/C-mount adapters are generally designed for the 1/2" camera targets. When a camera of 2/3 or larger target is used, the “dark corner” phenomenon will appear in the field of view. Especially, at present, DSLR cameras generally use large target plane design (1 inch full field of view), when used for microscopic photographing, the general DSLR camera coupler/C-mount adapter will have “black border”.
Generally, the “dark corner” that appears on the field of view is often that the center of the microscope and the camera are not aligned. Adjust the position of the screw on the camera adapter, or turn the camera adapter to adjust or change the effect.
C/CS-Mount CouplerClose Λ
At present, the coupler/C-mount adapter generally adopts the C/CS-Mount adapter to match with the industrial camera. For details, please refer to "Camera Lens Mount".
VGA Digital CameraClose Λ
The camera outputs digital signal, which are output to the display via the VGA adapter.
CMOSClose Λ
CMOS, or complementary metal oxide semiconductor.
Both CMOS and CCD sensors have their own respective advantages and disadvantages. As a kind of photoelectric conversion sensor, among the current cameras, CMOS is relatively more widely used.
Image Sensor SizeClose Λ
The size of the CCD and CMOS image sensors is the size of the photosensitive device. The larger the area of the photosensitive device, the larger the CCD/CMOS area; the more photons are captured, the better the photographic performance; the higher the signal-to-noise ratio, the larger the photosensitive area, and the better the imaging effect.
The size of the image sensor needs to match the size of the microscope's photographic eyepiece; otherwise, black borders or dark corners will appear within the field of view of observation.
Camera Maximum PixelsClose Λ
The pixel is determined by the number of photosensitive elements on the photoelectric sensor of the camera, and one photosensitive element corresponds to one pixel. Therefore, the more photosensitive elements, the larger the number of pixels; the better the imaging quality of the camera, and the higher the corresponding cost.
The pixel unit is one, for example, 1.3 million pixels means 1.3 million pixels points, expressed as 1.3MP (Megapixels).
Camera ResolutionClose Λ
Resolution of the camera refers to the number of pixels accommodated within unit area of the image sensor of the camera. Image resolution is not represented by area, but by the number of pixels accommodated within the unit length of the rectangular side. The unit of length is generally represented by inch.
Camera Signal Output PortClose Λ
The ways digital signals are output are:
USB 2.0, USB3.0
15 Pin VGA
Firewire Port
HDMI
VGA
Camera Link etc.

The ways of analog signal output are as follows:
BNC
RCA
Y-C etc.

In addition, some cameras store and output images in the form of a memory card. Usually, industrial cameras often have several output modes on one camera for convenience purposes.
Camera Lens MountClose Λ
Industrial camera adapters are usually available in three types:
1. C-Mount: 1" diameter with 32 threads per inch, flange back intercept 17.5mm.
2. CS-Mount: 1" diameter with 32 threads per inch, flange back intercept 12.5mm.
CS-Mount can be converted to a C-Mount through a 5mm spacer, C-mount industrial camera cannot use the CS-mount lens.
3. F-Mount: F-mount is the adapter standard of Nikon lens, also known as Nikon mouth, usually used on large-sized sensor cameras, the flange back intercept is 46.5mm.
Transmission Frame RateClose Λ
Frame rate is the number of output of frames per second, FPS or Hertz  for short. The number of frames per second (fps) or frame rate represents the number of times the graphics process is updated per second.

Due to the physiological structure of the human eye, when the frame rate of the picture is higher than 16fps, it is considered to be coherent, and high frame rate can make the image frame more smooth and realistic. Some industrial inspection camera applications also require a much higher frame rate to meet certain specific needs.
The higher the resolution of the camera, the lower the frame rate. Therefore, this should be taken into consideration during their selection. When needing to take static or still images, you often need a large resolution. When needing to operate under the microscope, or shooting dynamic images, frame rate should be first considered. In order to solve this problem, the general industrial camera design is to display the maximum frame rate and relatively smaller resolution when viewing; when shooting, the maximum resolution should be used; and some cameras need to set in advance different shooting resolutions when taking pictures, so as to achieve the best results.
White BalanceClose Λ
White balance is an indicator that describes the precision of white color generated in the image when the three primary colors of red, green and blue are mixed, which accurately reflects the color condition of the subject. There are manual white balance and automatic white balance.
White balance of the camera is to "restore white objects to white color under any light source." The chromatic aberration phenomenon occurred under different light sources is compensated by enhancing the corresponding complementary color. Automatic white balance can generally be used, but under certain conditions if the hue is not ideal, options of other white balance may be selected.
PackagingClose Λ
After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.

 


Optical Data

 

Video Microscope Optical Data Sheet
P/NObjective Coupler
MZ19026131  (0.5X)
Magnification
MZ190211011X0.35-2.25X
1. Magnification=Objective Optical Magnification * Body Magnification * Coupler Magnification



Digital Magnification Data Sheet
Image Sensor SizeImage Sensor Diagonal sizeMonitor
Screen Size (8in)
Digital Zoom Function
1/2.7 in. 6.718mm30.2
1. Digital Zoom Function= (Screen Size * 25.4) / Image Sensor Diagonal size



Microscope Optical and Digital Magnifications Data Sheet
ObjectiveCouplerCameraMonitorVideo Microscope Optical MagnificationsDigital Zoom FunctionTotal MagnificationField of View (mm)
PNMagnificationPNMagnification Image Sensor SizeImage Sensor Diagonal sizeScreen Size
MZ190211011XMZ190261310.5X1/2.7 in. 6.718mm8in0.35-2.25X30.210.57-67.95X2.99-19.19mm
1. Video Microscope Optical Magnifications=Objective Optical Magnification * Body Magnification * Coupler Magnification
2. Digital Zoom Function= (Screen Size * 25.4) / Image Sensor Diagonal size
3. Total Magnification= Video Microscope Optical Magnifications * (Screen Size * 25.4) / Image Sensor Diagonal size
4. Field of View (mm)= Image Sensor Diagonal size / Video Microscope Optical Magnifications

Contains  
Parts Including
MZ190261310.5X Coupler
MZ19021101Video Zoom Body
ST1901150150mm Post Stand
DC193111122M VGA Color Digital Camera
SA19071101Monitor Holder
MO192111018” LCD Color Monitor
Desiccant Bag1 Bag
Packing  
Packaging TypeCarton Packaging
Packaging MaterialCorrugated Carton
Packaging Dimensions(1)44.5x32.5x23cm (17.520x12.795x9.055″)
Inner Packing MaterialPlastic Bag
Ancillary Packaging MaterialsExpanded Polystyrene
Gross Weight4.61kg (10.16lbs)
Minimum Packaging Quantity1pc
Transportation CartonCarton Packaging
Transportation Carton MaterialCorrugated Carton
Transportation Carton Dimensions(1)44.5x32.5x23cm (17.520x12.795x9.055″)
Total Gross Weight of Transportation(kilogram)4.61
Total Gross Weight of Transportation(pound)10.16
Quantity of One Transportation Carton1pc

Related Products

Customers Also Viewed