Arbor Length 195mm Arbor Diameter Dia. 32mm Focus Distance 50mm Horizontal Arm Length 450mm 76mm Surgical Pneumatic Arm ST02071912

SKU:
ST02071912
Condition:
New
$1,888.94
& Free shipping * Contiguous USA Only
In Stock
Other Shipping Options
Quick Overview
Pneumatic Arm. Dia. 76mm Scope Holder. Horizontal Arm Length: 450mm. Total Arm Length: 940mm. Base Dimensions: 125x105x160mm. Focus Distance: 50mm . Arbor Length: 195mm. Arbor Diameter: Dia. 32mm. Mount Adapter Size of Stand: M4 Pitch 40x40mm. Fixing Adapter Size of Base: M8 Pitch 75x75mm. Platform Pitch: 25x25mm. Platform Screw Standard: M6. With Safety protection against falling Screw. Top Illumination: Oblique Top Light. Input Voltage: DC 12V. For ST02071902 Pneumatic Arm.


ST02071912 76mm Surgical Pneumatic Arm
Flexible Arm
Stand TypePneumatic Arm
Holder Adapter Type Dia. 76mm Scope Holder
Horizontal Arm Length450mm
Total Arm Length940mm
Horizontal Rotation Angle360° Degree Rotatable
Horizontal Arm Maximum Load8.00kg (17.64lbs)
Horizontal Arm Travel Mode on Horizontal DirectionManual
Base TypeHoneycomb Optical Table
Base ShapeRectangle
Stand Throat Depth165mm
Base Dimensions125x105x160mm
Focus ModeManual
Focus Distance50mm
Coarse Focus Distance per Rotation22mm
Arbor Length195mm
Arbor Diameter Dia. 32mm
Arbor Rotation Range on Z Direction180°
Platform Pitch25x25mm
Platform Screw StandardM6
Safety Protection Against Falling ScrewWith Safety protection against falling Screw
Top IlluminationOblique Top Light
Top Illumination TypeLED
Input VoltageDC 12V
Surface TreatmentSpray Paint
MaterialMetal
ColorBlack, White
Net Weight12.80kg (28.22lbs)
Honeycomb Optical Table Adapter
Flexible Arm Adapter for Optical Breadboard
Mount Adapter Size of StandM4 Pitch 40x40mm
Fixing Adapter Size of BaseM8 Pitch 75x75mm
Surface TreatmentBlack Oxide Finish
MaterialMetal
ColorBlack
Net Weight0.30kg (0.66lbs)
Dimensions110x110x10mm (4.331x4.331x0.394 in. )
Applied FieldFor ST02071902 Pneumatic Arm

 


Technical Info

Instructions
Microscope StandClose Λ
Microscope stand have many options depending on the needs, especially stereo microscope stand, there are several factors to consider before choosing:
Stability: microscope stand is used to prop up the microscope body. The stand should be selected according to the size of the microscope mainframe. The stability of the stand determines the stability of the microscope in use, and its various adapters and screws must be tightly locked.
Volume size: limited by the working environment and space of the workbench.
Workspace and scope: the size of the workspace of the object being observed and the height of the object being observed should be considered.
Choice of lighting: some stands are equipped with a light source, but some are not, depending on whether there are conditions to add additional lighting.

Operational requirements:
1. Install the stand as required.
2. Arrange a reasonable fixed position for the stand.
3. Carefully tighten the microscope mainframe.
4. Arrange the location of the additional light source reasonably, and place the electric wire in a position that does not interfere with the work.
5. Connect the various kinds of peripheral devices, such as cameras, monitors, computers and so on.
Flexible ArmClose Λ
Flexible arm is an arm or stand that imitates the human arm. It is a combination of several mechanical arm joints to complete the horizontal and vertical movement and freely adjust the focus position of the microscope. Flexible arm allows the microscope to move flexibly and freely over a wide range, and is also suitable for viewing larger objects.
The fixing method of the arm is usually optional, with strong interchangeability. Below the observation of the microscope there is an empty workbench, which can be used to place various kinds of platforms, work operating tables, tools, etc., and can be freely combined into different working positions.
In industrial places, most of the working positions are fixed. Sometimes, a lot of tools, equipment and instruments need to be placed in one working position. Because the microscope is relatively large in size and takes up also a relatively bigger space, and not convenient to move back and forth, therefore the flexible arm can be placed in a flexible position, and does not occupy the most commonly used workbench. When in use, the microscope can be moved over, and pushed to the side when not in use. This is very suitable for use in electronics factories, installation and maintenance, medical and animal anatomy, archaeology and other industries.
Flexible arm generally does not have a fixed focusing device, and you can choose a variety of flexible accessories.
When adjusting the height of the flexible arm, you need to use both hands at the same time, with one hand holding the microscope or the forearm of the stand, and the other adjusting the adjusting screw or spring mechanism that looses/tightens the arm. When releasing, pay attention to avoiding sudden sliding down.

Because one needs to ensure the flexibility of the arm or stand, there are many locking buttons in all directions. After the necessary locking buttons are adjusted, it must be ensured that each knob is in locked state to avoid sliding, tilting, and flipping of the microscope, thereby damaging the microscope and the items on the workbench.

Flexible arm has a mechanism of the hydraulic spring for adjusting the pre-tightening tension. When different microscopes weigh differently, these flexible arms can be adjusted to make the microscope more stable.
Dia. 76mm Scope HolderClose Λ
The 76mm stand scope holder is the most popular microscope body adapter size, suitable for stereo microscopes produced by most manufacturers.

Place the microscope body in a 76mm scope holder, tighten with screws to avoid shaking when the microscope is in use.
Because this stand scope holder is very common, some special-sized microscopes can also borrow and use this stand, but only need a specific adapter to connect the microscope body with a diameter of less than 76mm.
360° Degree RotatableClose Λ
The eyepiece of the microscope can have different viewing or observing directions. When the position of the microscope is uncomfortable, the direction of the eyepiece tube of the microscope can be adjusted, to facilitate observation and operation.

Placement method of different viewing angles of the microscope:
General direction: the support column is behind the object to be observed
Reverse direction: the support column is in front of the object to be observed
Lateral direction: the support column is on the side of the object to be observed
Rotating eyepiece tube, different microscopes may have different methods, for some, the direction is confirmed when installing the eyepiece tube of the microscope, for some, by rotating the body of the microscope, and for some, by rotating the support member on the support or holder of the microscope.
Stand Throat DepthClose Λ
Stand throat depth, also known as the throat depth, is an important parameter when selecting a microscope stand. When observing a relatively large object, a relatively large space is required, and a large throat depth can accommodate the object to move to the microscope observation center.
Honeycomb Optical Table AdapterClose Λ
Honeycomb optical table adapter is the adapter that connect the microscope stand and the optical table. At this time, the stand uses the optical table as the base.
Honeycomb optical tables are usually available in two size standards, namely, the metric size standard, and the British system size standard (1X1", or 25X25mm). When selecting the adapter, attention should be paid to the size that adapter to the honeycomb optical table.
PackagingClose Λ
After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.

More Info

Contains  
Parts Including
PictureP/NProduct Name
SA02121103Flexible Arm Adapter for Optical Breadboard
Packing  
Packaging TypeCarton Packaging
Packaging MaterialCorrugated Carton
Packaging Dimensions(1)81x41x18.5cm (31.890x16.142x7.283″)
Packaging Dimensions(2)46x30.5x25.5cm (18.110x12.008x10.039″)
Packaging Dimensions(3)12.8x10.7x5.6cm (5.039x4.212x2.204″)
Inner Packing MaterialPlastic Bag
Ancillary Packaging MaterialsExpanded Polystyrene
Gross Weight14.20kg (31.31lbs)
Minimum Packaging Quantity1pc
Transportation CartonCarton Packaging
Transportation Carton MaterialCorrugated Carton
Transportation Carton Dimensions(1)81x41x18.5cm (31.890x16.142x7.283″)
Transportation Carton Dimensions(2)46x30.5x25.5cm (18.110x12.008x10.039″)
Transportation Carton Dimensions(3)12.8x10.7x5.6cm (5.039x4.212x2.204″)
Total Gross Weight of Transportation(kilogram)9.00
Total Gross Weight of Transportation(pound)19.84
Quantity of One Transportation Carton1pc

Related Products