300x450x13mm Horizontal Arm Length 570mm Vertical Post Height 384mm Dual Arm Boom Stand ST02061111

SKU:
ST02061111
Condition:
New
$947.94
& Free shipping * Contiguous USA Only
In Stock
Other Shipping Options
Quick Overview
Dual Arm Stand. Vertical Post Height: 384mm. Vertical Post Diameter: Dia. 37.2mm. Horizontal Arm Length: 570mm. Horizontal Diameter: Dia. 20mm. Mounting Hole on the Top of Horizontal Arm: 16mm. Mount Adapter Size of Stand: Dia. 37.2mm. Fixing Adapter Size of Base: M6 Pitch 50x50mm. Platform Dimensions: 300x450x13mm. Platform Pitch: 25x25mm. Platform Screw Standard: M6. For ST0205, ST0206 Series Boom Stand.


ST02061111 Dual Arm Boom Stand
Dual Arm Stand
Stand TypeDual Arm Stand
Vertical Post Height384mm
Maximum Vertical Post Extended Length254mm
Vertical Post Diameter Dia. 37.2mm
Cross Adapter TypeTriple (3) Hole Adapter
Horizontal Arm TypeDouble Bar
Horizontal Arm Length570mm
Horizontal Diameter Dia. 20mm
Mounting Hole on the Top of Horizontal Arm16mm
Horizontal Rotation Angle360° Degree Rotatable
Horizontal Arm Travel Distance on Z-Axis282mm
Horizontal Arm Stretch Range320mm (12.598 in. )
Horizontal Arm Maximum Load9.50kg (20.94lbs)
Horizontal Arm Travel Mode on Horizontal DirectionBall Bearing
Horizontal Arm Travel Mode on Z DirectionManual
Base TypeHoneycomb Optical Table
Base ShapeRectangle
Platform Dimensions300x450x13mm
Platform Pitch25x25mm
Platform Screw StandardM6
Surface TreatmentElectroplating Black
MaterialMetal
ColorBlack
Net Weight15.00kg (33.06lbs)
Honeycomb Optical Table Adapter
Boom Stand Adapter for Optical Breadboard
Mount Adapter Size of Stand Dia. 37.2mm
Fixing Adapter Size of BaseM6 Pitch 50x50mm
Surface TreatmentElectroplating Black
MaterialMetal
ColorBlack
Net Weight0.30kg (0.66lbs)
Applied FieldFor ST0205, ST0206 Series Boom Stand

 


Technical Info

Instructions
Microscope StandClose Λ
Microscope stand have many options depending on the needs, especially stereo microscope stand, there are several factors to consider before choosing:
Stability: microscope stand is used to prop up the microscope body. The stand should be selected according to the size of the microscope mainframe. The stability of the stand determines the stability of the microscope in use, and its various adapters and screws must be tightly locked.
Volume size: limited by the working environment and space of the workbench.
Workspace and scope: the size of the workspace of the object being observed and the height of the object being observed should be considered.
Choice of lighting: some stands are equipped with a light source, but some are not, depending on whether there are conditions to add additional lighting.

Operational requirements:
1. Install the stand as required.
2. Arrange a reasonable fixed position for the stand.
3. Carefully tighten the microscope mainframe.
4. Arrange the location of the additional light source reasonably, and place the electric wire in a position that does not interfere with the work.
5. Connect the various kinds of peripheral devices, such as cameras, monitors, computers and so on.
Dual Arm StandClose Λ
Dual arm stand is also called double bar stand, or ball bearing boom stand.
The method of use of dual arm stand and most of its parameters are mostly the same as that of the boom stand. The difference is that the cross arm has two rods, and is held by one set of bearings, so that the two cross arms can be freely pulled and moved, and they are vertical and cannot be tilted left and right, making it more free and stable than the use of the dual arm stand in the horizontal direction. It is especially suitable for users who need to frequently push and pull, observe and adjust the position in horizontal direction.
360° Degree RotatableClose Λ
The eyepiece of the microscope can have different viewing or observing directions. When the position of the microscope is uncomfortable, the direction of the eyepiece tube of the microscope can be adjusted, to facilitate observation and operation.

Placement method of different viewing angles of the microscope:
General direction: the support column is behind the object to be observed
Reverse direction: the support column is in front of the object to be observed
Lateral direction: the support column is on the side of the object to be observed
Rotating eyepiece tube, different microscopes may have different methods, for some, the direction is confirmed when installing the eyepiece tube of the microscope, for some, by rotating the body of the microscope, and for some, by rotating the support member on the support or holder of the microscope.
Honeycomb Optical Table AdapterClose Λ
Honeycomb optical table adapter is the adapter that connect the microscope stand and the optical table. At this time, the stand uses the optical table as the base.
Honeycomb optical tables are usually available in two size standards, namely, the metric size standard, and the British system size standard (1X1", or 25X25mm). When selecting the adapter, attention should be paid to the size that adapter to the honeycomb optical table.
PackagingClose Λ
After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.

More Info

Contains  
Parts Including
PictureP/NProduct Name
SA02121102Boom Stand Adapter for Optical Breadboard
Packing  
Packaging TypeCarton Packaging
Packaging MaterialCorrugated Carton
Packaging Dimensions(1)51x43x18cm (20x17x7″)
Packaging Dimensions(2)46x30.5x25.5cm (18.110x12.008x10.039″)
Packaging Dimensions(3)12.8x10.7x5.6cm (5.039x4.212x2.204″)
Inner Packing MaterialPlastic Bag
Ancillary Packaging MaterialsExpanded Polystyrene
Gross Weight17.70kg (39.02lbs)
Minimum Packaging Quantity1pc
Transportation CartonCarton Packaging
Transportation Carton MaterialCorrugated Carton
Transportation Carton Dimensions(1)51x43x18cm (20x17x7″)
Transportation Carton Dimensions(2)46x30.5x25.5cm (18.110x12.008x10.039″)
Transportation Carton Dimensions(3)12.8x10.7x5.6cm (5.039x4.212x2.204″)
Total Gross Weight of Transportation(kilogram)17.70
Total Gross Weight of Transportation(pound)39.02

Related Products