Compound Compatible Tool Maker Measurement Scope 0.3X Coupler Body MS02041401-0001

SKU:
MS02041401-0001
Condition:
New
  • Compound Compatible Tool Maker Measurement Scope 0.3X Coupler Body MS02041401-0001
  • Compound Compatible Tool Maker Measurement Scope 0.3X Coupler Body MS02041401-0001
$82.50
& Free shipping * Contiguous USA Only
Pre-Order. Place your order and we’ll email you once we have an estimated delivery date.
Other Shipping Options
Quick Overview
Compound Compatible. Coupler Magnification: 0.3X. For MS2401 Series Microscope.


MS02041401-0001 Tool Maker Measurement Scope 0.3X Coupler Body
Optical Parts
Coupler Mount Type for Eye TubeFastening Screw
Coupler Mount Size for Eye Tube Dia. 23mm
Coupler for Microscope TypeCompound Compatible
Coupler Magnification0.3X
C/CS-Mount CouplerC-Mount
Surface TreatmentElectroplating Black
MaterialMetal
ColorBlack
Net Weight0.08kg (0.18lbs)
Applied FieldFor MS2401 Series Microscope

 


Technical Info

Instructions
Coupler for Microscope TypeClose Λ
Different coupler/C-mount-adapters are suitable for different microscopes. For some, some adapter accessories need to be replaced. See the applicable range of each coupler/C-mount-adapter for details.
Coupler MagnificationClose Λ
Coupler magnification refers to the line field magnification of the coupler/C-mount-adapter. With different magnifications of the adapter lens, images of different magnifications and fields of view can be obtained. The size of the image field of view is related to the sensor size and the coupler/C-mount-adapter magnification.

Camera image field of view (mm) = sensor diagonal / coupler/C-mount-adapter magnification.

For example: 1/2 inch sensor size, 0.5X coupler/C-mount-adapter coupler, field of view FOV (mm) = 8mm / 0.5 = 16mm.
The field of view number of the microscope 10X eyepiece is usually designed to be 18, 20, 22, 23mm, less than 1 inch (25.4mm). Since most commonly used camera sensor sizes are 1/3 and 1/2 inches, this makes the image field of view on the display always smaller than the field of view of the eyepiece for observation, and the visual perception becomes inconsistent when simultaneously viewed on both the eyepiece and the display. If it is changed to a 0.5X coupler/C-mount-adapter, the microscope image magnification is reduced by 1/2 and the field of view is doubled, then the image captured by the camera will be close to the range observed in the eyepiece.
Some adapters are designed without a lens, and their optical magnification is considered 1X.
C/CS-Mount CouplerClose Λ
At present, the coupler/C-mount adapter generally adopts the C/CS-Mount adapter to match with the industrial camera. For details, please refer to "Camera Lens Mount".

More Info

Related Products