-
Free Shipping
-
Contact UsEmail sales@bolioptics.com
| Mounting Hole Dimensions | M6 |
| Surface Treatment | Spray Paint |
| Material | Metal |
| Color | White |
| Net Weight | 0.52kg (1.15lbs) |
| Applied Field | For SM51019214 Rolling Floor Stand |
Technical Info
| Light emitting diode is a type of semiconductor diode that can convert electrical energy into light energy. Advantages: low operating current, low operating voltage, working voltage between 3-24V DC, so it is a safer power supply than high voltage power supply, especially suitable for weak electrical equipment. Its electro-optical conversion efficiency is high (close to 60%), and its low power consumption, low heat, and energy consumption are reduced by about 80% compared with incandescent lamps with the same light efficiency, and about 40% less than the energy-saving lamp. It is a kind of cold light with low temperature. As an illumination that is close to the observed object, especially the bottom, it may not interfere with and damage the observed object and the temperature environment. LEDs are easy to dim, and its beam is concentrated. LED has two control modes, namely, constant current mode, and constant voltage mode. Most LEDs adopt constant current control, which can keep the LED current stable and extend the service life of LED lamps. LED is also easy to select the color temperature of light, suitable for observing different objects. The energy band structure and the forbidden band width of the material can be adjusted by chemical modification methods to realize multi-color luminescence of red, yellow, green, blue and orange and, from red to blue, the color can cover the entire visible spectrum. LED has long service life. LED's service life can reach 100,000 hours under the right current and voltage, and repeated switching on and off will not damage its service life. LED has high brightness, even and stable illumination, fast response speed, start-up has no delay, and its response time is of the nanosecond level. Given its small size, flexible structural position and combined application, each unit LED small piece is a 3-5mm square, so it can be made into various shapes of devices. It is safe, durable, shock and seismic resistance, with high reliability. Energy-saving, environmentally friendly, LED is composed of non-toxic materials, unlike mercury lamps which contain mercury that can cause pollution, and LEDs can also be recycled. In contrast, various kinds of traditional lighting has certain drawbacks: Incandescent lamp: low electro-optical light conversion efficiency (about 10%), short service life (about 1000 hours), high heat generation temperature, single color and low color temperature. Fluorescent lamp: electro-optical conversion efficiency is not high (about 30%), harmful to the environment (including harmful elements such as mercury, about 3.5-5mg / only), non-adjustable brightness (low voltage can not start to illuminate), has ultraviolet radiation, flicker phenomenon, start-up slower, and repeated switching on and off can affect service life, with also relatively bigger size. High-pressure gas discharge lamp (mercury lamp): high power consumption, unsafe use, short service life, and many heat dissipation problems. LED shortcomings: high initial cost, poor color rendering, discontinuous spectrum, not suitable for some special lighting industry applications, high power LED low efficiency, long-term use can gradually become darkened, and there is brightness and light decay phenomenon. |
| After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection. For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem. |
| Packing | |
| Packaging Type | Carton Packaging |
| Packaging Material | Corrugated Carton |
| Inner Packing Material | Plastic Bag |
| Ancillary Packaging Materials | Expanded Polystyrene |
| Minimum Packaging Quantity | 1pc |
| Transportation Carton | Carton Packaging |
| Transportation Carton Material | Corrugated Carton |
| Quantity of One Transportation Carton | 1pc |
