Microscope Post Stand, 76mm Coarse Focus Rack, Top and Bottom Light, Halogen and Fluorescent (Dimmable)

SKU:
ST07011401
Warranty:
1 Year
Certificate:
CE
Condition:
New
  • Microscope Post Stand, 76mm Coarse Focus Rack, Top and Bottom Light, Halogen and Fluorescent (Dimmable)
  • Microscope Post Stand, 76mm Coarse Focus Rack, Top and Bottom Light, Halogen and Fluorescent (Dimmable)
  • Microscope Post Stand, 76mm Coarse Focus Rack, Top and Bottom Light, Halogen and Fluorescent (Dimmable)
  • Microscope Post Stand, 76mm Coarse Focus Rack, Top and Bottom Light, Halogen and Fluorescent (Dimmable)
  • Microscope Post Stand, 76mm Coarse Focus Rack, Top and Bottom Light, Halogen and Fluorescent (Dimmable)
  • Microscope Post Stand, 76mm Coarse Focus Rack, Top and Bottom Light, Halogen and Fluorescent (Dimmable)
$371.96 $185.98
& Free shipping * Contiguous USA Only
In Stock
Other Shipping Options
Quick Overview
Post Stand. Dia. 76mm Scope Holder. Vertical Post Height: 300mm. Vertical Post Diameter: 30mm. Base Dimensions: 190x245x34mm. Focus Distance: 82mm. Matte Finish Glass Plate. Plate Size: Dia. 87x2.5mm. Illumination Type: HF Dual Illuminated Light. Top Illumination: Oblique Top Light. Input Voltage: AC 110V 60Hz. Power Cord Connector Type: USA 3 Pins.


ST07011401 76mm HF Dual Illuminated Post Stand
Post Stand
Stand TypePost Stand
Holder Adapter Type Dia. 76mm Scope Holder
Vertical Post Height300mm
Vertical Post Diameter30mm
Base TypeIllumination Base
Base ShapeRectangle
Base Dimensions190x245x34mm
Focus ModeManual
Focus Distance82mm
Coarse Focus Distance per Rotation20mm
Center Distance from Hole to Scope Holder124mm
Illumination TypeHF Dual Illuminated Light
Top IlluminationOblique Top Light
Top Illumination TypeHalogen Light
Bottom Illumination TypeFluorescent Light
Input VoltageAC 110V 60Hz
Power Cord Connector TypeUSA 3 Pins
Power Cable Length1.5m
Surface TreatmentSpray Paint
MaterialMetal
ColorCamel Grey
Net Weight4.40kg (9.70lbs)
Dimensions190x245x335mm (7.480x9.646x13.189 in. )
Focus Rack
76/30mm Through Hole Focus Rack
Holder Adapter Type Dia. 76mm Scope Holder
Focus ModeManual
Focus Distance82mm
Coarse Focus Distance per Rotation20mm
Post Hole Diameter of Focusing Rack Dia. 30mm
Surface TreatmentSpray Paint
MaterialMetal
ColorCamel Grey
Net Weight2.80kg (6.17lbs)
Microscope Plate
87x2.5mm Matte Glass Plate
Plate TypeMatte Finish Glass Plate
Plate Size Dia. 87x2.5mm
MaterialMatte Finish Float Glass
ColorFrosted Glass
Applied FieldFor ST0701 Series Post Stand
Fuse
2A Fuse
Fusing Current2A/250V
Fuse TypeGlass Tube Fuse (Fast Acting)
Fuse Size5x20
Fuse StandardGB
MaterialGlass
ColorSilver
Net Weight0.002kg (0.004lbs)

 


Technical Info

Instructions
Microscope StandClose Λ
Microscope stand have many options depending on the needs, especially stereo microscope stand, there are several factors to consider before choosing:
Stability: microscope stand is used to prop up the microscope body. The stand should be selected according to the size of the microscope mainframe. The stability of the stand determines the stability of the microscope in use, and its various adapters and screws must be tightly locked.
Volume size: limited by the working environment and space of the workbench.
Workspace and scope: the size of the workspace of the object being observed and the height of the object being observed should be considered.
Choice of lighting: some stands are equipped with a light source, but some are not, depending on whether there are conditions to add additional lighting.

Operational requirements:
1. Install the stand as required.
2. Arrange a reasonable fixed position for the stand.
3. Carefully tighten the microscope mainframe.
4. Arrange the location of the additional light source reasonably, and place the electric wire in a position that does not interfere with the work.
5. Connect the various kinds of peripheral devices, such as cameras, monitors, computers and so on.
Post StandClose Λ
Post stand generally has relatively tall post. When the focus is adjusted, the focusing mechanism can slide up and down the post, the microscope is thus placed in an approximately focused position, and then the focusing mechanism makes fine and accurate adjustment. This kind of stand can move quickly, and is suitable for viewing objects with a higher height and bigger volume.
After the microscope is mounted, the microscope imaging center needs to be aligned with the center of the platen.
The focusing mechanism button on the post must be tightened to lock the guard ring device, and the microscope should be prevented from loosening and shaking when working. When it is necessary to adjust the height, hold the microscope and the focusing mechanism with one hand, then release the knob, adjust it to the proper position, lock the knob, then top the guard ring to the lower position of the focusing mechanism, and lock it tight. In particular, avoid accidental dropping of the microscope due to gravity, thereby damaging the microscope and the objects below.
Dia. 76mm Scope HolderClose Λ
The 76mm stand scope holder is the most popular microscope body adapter size, suitable for stereo microscopes produced by most manufacturers.

Place the microscope body in a 76mm scope holder, tighten with screws to avoid shaking when the microscope is in use.
Because this stand scope holder is very common, some special-sized microscopes can also borrow and use this stand, but only need a specific adapter to connect the microscope body with a diameter of less than 76mm.
Illumination BaseClose Λ
Illumination base is a modular light source component, suitable for microscope stand base that has no light source of itself, and it is usually dedicated components supporting some stands.
Illumination base typically includes at least one bottom lighting, and there are also illumination base that includes the circuit portion of the upper light source.
Focus RackClose Λ
Focus rack is the focusing mechanism that connects the microscope, with one end connected to the post of the microscope stand to adjust the up and down movement of the microscope for focusing.
The front end of the focus rack can also be used to connect microscopes or cameras of different diameters by changing the scope holder.
Microscope PlateClose Λ
According to different objects to be observed, the appropriate platen should be selected. The microscope plate materials include black and white, black and white finish; transparent glass, frosted glass, metal, etc.
Standard stands are generally configured with a suitable microscope plate, but different plates may need to be purchased separately.
Black and white microscope plate are made of general plastics, and the different backgrounds in black and white make the object more prominent.
Finish microscope plate eliminates reflections during observation.
Transparent glass plate is used when observing transparent or translucent objects, and the use of transmitted light source is to make the light penetrate the object to be observed as much as possible.
Finish glass plate, with its rough glass surface, can make the transmitted light more uniform and create a diffusing effect, avoiding exposure of the light shadow of the filament directly onto to the observed object.
Metal plate, relatively more solid, is more suitable when it is necessary to operate and cut.
Microscope plate is generally round shaped, on one side of the base there is a spring clip. When installing, align the plate with the clamp and push it in, and then press down the other end, so that the plate is smoothly embedded in to the circular card slot of the bottom plate.
When removing, grab the other end of the clip, push and lift up the plate.
PackagingClose Λ
After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.

More Info

Contains  
Parts Including
PictureP/NProduct Name
SA0714120187x2.5mm Matte Glass Plate
SA0704110176/30mm Through Hole Focus Rack
EP990311272A Fuse
Packing  
Packaging TypeCarton Packaging
Packaging MaterialCorrugated Carton
Packaging Dimensions(1)32.5x29.5x54.5cm (12.795x11.614x21.457″)
Inner Packing MaterialPlastic Bag
Ancillary Packaging MaterialsExpanded Polystyrene
Gross Weight5.73kg (12.63lbs)
Transportation CartonCarton Packaging
Transportation Carton MaterialCorrugated Carton
Transportation Carton Dimensions(1)32.5x29.5x54.5cm (12.795x11.614x21.457″)
Total Gross Weight of Transportation(kilogram)5.73
Total Gross Weight of Transportation(pound)12.63
Quantity of One Transportation Carton1pc

Related Products