-
Free Shipping
-
Contact UsEmail sales@bolioptics.com
| Optical System | Finite |
| System Optical Magnification | 0.35-2.25X |
| Total Magnification | 0.35-2.25X |
| Standard Objective | 1X Built-in Objective |
| Standard Coupler | 0.5X |
| 0.7-4.5X Video Zoom Body | |
| Body Optical System | Finite |
| Body Magnification | 0.7-4.5X |
| Zoom Range | 0.7-4.5X |
| Zoom Ratio | 1:6.4 |
| Zoom Operating Mode | With the Nosepiece |
| Body Mounting Size for Stand | Dia. 40mm |
| Magnification Detent | 1X per pre-set stop |
| Body Mount Type for Coupler | Fastening Screw |
| Body Mount Size for Coupler | Dia. 33.3mm |
| Objective Screw Thread | M25x0.75mm |
| Surface Treatment | Electroplating Black |
| Material | Metal |
| Color | Black |
| Net Weight | 0.35kg (0.77lbs) |
| 76mm Track Stand | |
| Stand Type | Track Stand |
| Holder Adapter Type | Dia. 76mm Scope Holder |
| Track Length | 280mm |
| Base Type | Table Base |
| Base Shape | Fan-Shape |
| Stand Throat Depth | 130mm |
| Base Dimensions | 280x240x25mm |
| Focus Mode | Manual |
| Focus Distance | 105mm |
| Coarse Focus Distance per Rotation | 20mm |
| Focusing Knob Tightness Adjustable | Tightness Adjustable |
| Surface Treatment | Spray Paint |
| Material | Metal |
| Color | White |
| Net Weight | 2.80kg (6.17lbs) |
| 40/76mm Donut | |
| Donut Adapter Type | Scope Mounting Converter |
| Donut Adapter Size for Scope Mounting | Dia. 40mm |
| Donut Adapter Size for Scope Holder | Dia. 76mm |
| Donut Adapter Height | 20mm |
| Surface Treatment | Electroplating Black |
| Material | Metal |
| Color | Black |
| Net Weight | 0.18kg (0.40lbs) |
| Applied Field | For MZ07011101 Video Zoom Body |
| 140x6mm Black White Plate | |
| Plate Type | Black White Plate |
| Plate Size | Dia. 140x6mm |
| Material | Plastic (ABS) |
| Color | Black, White |
| Net Weight | 0.12kg (0.26lbs) |
| Applied Field | For ST1703 Series Track Stand |
| 20W UV Free LED Fiber Optic Illuminator | |
| Light Source Type | UV FREE LED Light |
| Power Supply Adjustable | Light Adjustable |
| Light Source Luminous Flux | 900-1100 LM |
| Power Box Light Port | Single Hole |
| Fiber Cable Adapter Size | 5/8 in. End Adapter |
| Power Box Panel Meter Display | Pointer Panel Meter/Scale |
| Power Box Cooling System | Heat Sink |
| Power Box Dimensions | 185x150x95mm |
| Bulb Color Temperature | 6500K |
| Bulb Color (Wavelength) | UV FREE |
| Output Power | 24W |
| Input Voltage | AC 96-265V 50/60Hz |
| Output Voltage | DC 24V |
| Power Cord Connector Type | USA 3 Pins |
| Surface Treatment | Black Oxide Finish |
| Material | Metal |
| Color | Black |
| Net Weight | 2.80kg (6.17lbs) |
| 460mm Dual Pipe Light Guide | |
| Optical Fiber Cable Type | Gooseneck Dual Pipe Light |
| Fiber Light Output Port Size | Dia. 5mm |
| Fiber Cable Output Port Adapter Size | Dia. 8mm |
| Fiber Light Input Port Size | Dia. 7mm |
| Fiber Cable Input Port Adapter Size | 5/8 in. End Adapter |
| Pipe Material | Gooseneck Fiber Cable |
| Optical Fiber Cable Length | 460mm |
| Pipe Diameter | Dia. 12.4mm |
| Pipe Color | Silver |
| Flexural Property | Min. Bending Radius ≥30D |
| Fiber Cable Mounting Type | Fastening Screw |
| Fiber Condenser Light Spot Adjustable | Adjustable |
| Material | Metal |
| Color | Silver |
| Net Weight | 0.60kg (1.32lbs) |
| 0.5X Coupler | |
| Coupler Mount Type for Body | Fastening Screw |
| Coupler Mount Size for Body | Dia. 33.3mm |
| Coupler for Microscope Type | Video Zoom Lens Compatible |
| Coupler Magnification | 0.5X |
| For Camera Sensor Size | Under 1/2 in. |
| C/CS-Mount Coupler | C-Mount |
| Surface Treatment | Electroplating Black |
| Material | Metal |
| Color | Black |
| Net Weight | 0.14kg (0.30lbs) |
| Applied Field | For MZ0701 Series Video Zoom Body |
| 2M HDMI Color Camera | |
| Image Sensor | CMOS |
| Image Sensor Size | 1/2.86 in. |
| Image Sensor Diagonal size | 6.592mm (0.260 in. ) |
| Camera Maximum Pixels | 2.0 Megapixels |
| Camera Resolution | 1920x1080 |
| Camera Signal Output Port | HDMI / USB 2.0 |
| Camera Lens Mount | C-Mount |
| Transmission Frame Rate | 30fps@1920x1080 |
| White Balance | Manual/Auto |
| Gain Control | Adjustable |
| Exposure Control | Manual |
| Image Comparison | Yes |
| Image Freeze Function | Image Freeze |
| Digital Zoom Function | 10X |
| Camera Crosshairs | Cross Line |
| Number of Crosshairs | 4 Movable Crosshairs |
| Line Color | User Defined |
| Capture Function | Yes |
| Image Capture Output Format | Bitmap |
| Video Output Format | AVI |
| Language | English |
| System Requirement | Windows XP/7/8/10/11 |
| Camera Housing Material | Metal |
| Camera Housing Size | 83x74x53mm |
| Camera Housing Color | Blue |
| Memory Type | SD |
| Input Voltage | DC 12V |
| Surface Treatment | Electroplating |
| Net Weight | 0.60kg (1.32lbs) |
| 2M HDMI Color Camera | |
| Mouse Operation | Yes |
| Memory Type | SD |
| Memory Capacity | 8G |
| 13.3 in. Color Monitor | |
| Screen Size | 13.3in |
| Screen Aspect Ratio | 16:9 |
| Monitor Input Signal Format | HDMI |
| Monitor Signal Format | PAL/NTSC/SECAM |
| Monitor Max. Resolution | 1920x1080 |
| Screen Active Area | 293x167mm (11.535x6.575 in. ) |
| Screen Contrast | 1000:1 |
| Screen Brightness | 350cd/m2 |
| Response Time | 6ms |
| Screen Viewing Angle | 178°/178° |
| Screen Backlight | LCD Display |
| Monitor Operating Temperature | 0℃~50℃ |
| Monitor Housing Material | Metal |
| Monitor Housing Size | 320x203x14mm |
| Monitor Housing Color | Black |
| Input Voltage | DC 12V |
| Net Weight | 0.65kg (1.43lbs) |
| MZ0701 | MZ02210013 |
Technical Info
| Video zoom lens, refers to microscope that has only one set of imaging optical paths. It can be considered as a set of dual optical path stereo microscopes. The magnification and multiple range of video zoom lens are usually the same as those of a stereo microscope, but because the objective lens is one, its optical imaging is flat, not stereoscopic. It has been observed that as most of the parametric features are close to stereo microscopes, video zoom lens is then classified as stereo microscope. In fact, it lacks the most important "stereoscopic" imaging features. Compared with other compound microscopes such as biological metallurgical microscopes, the total optical magnification of video zoom lens is generally below 40X, which is the coverage of low magnification range that these microscopes do not have. Most of the video continuous zoom lens is to observe the electronic image, not through the eyepiece, but through the camera. Video zoom lens can have relatively more objective lens and photographic eyepiece multiples for selection. At the same time, video zoom lens can also be designed as parallel light so as to add even more configuration accessories, such as observation eyepieces, aperture diaphragms, coaxial illumination light sources, reticles, and nosepieces that can change the viewing angle and direction, etc. Regarding accessories of video zoom lens such as the stands and light source etc., generally, all accessories of stereo microscope can be used. Therefore, video zoom lens combination is flexible, compact, with strong adaptability and low cost, suitable for use in industry, especially extensively used in the electronics industry. |
| Microscopes and components have two types of optical path design structures. One type is finite optical structural design, in which light passing through the objective lens is directed at the intermediate image plane (located in the front focal plane of the eyepiece) and converges at that point. The finite structure is an integrated design, with a compact structure, and it is a kind of economical microscope. Another type is infinite optical structural design, in which the light between the tube lens after passing the objective lens becomes "parallel light". Within this distance, various kinds of optical components necessary such as beam splitters or optical filters call be added, and at the same time, this kind of design has better imaging results. As the design is modular, it is also called modular microscope. The modular structure facilitates the addition of different imaging and lighting accessories in the middle of the system as required. The main components of infinite and finite, especially objective lens, are usually not interchangeable for use, and even if they can be imaged, the image quality will also have some defects. The separative two-objective lens structure of the dual-light path of stereo microscope (SZ/FS microscope) is also known as Greenough. Parallel optical microscope uses a parallel structure (PZ microscope), which is different from the separative two-object lens structure, and because its objective lens is one and the same, it is therefore also known as the CMO common main objective. |
| The magnification of the objective lens refers to the lateral magnification, it is the ratio of the image to the real size after the original image is magnified by the instrument. This multiple refers to the length or width of the magnified object. System optical magnification is the product of the eyepiece and the objective lens (objective lens zoom set) of the optical imaging part within the system. Optical magnification = eyepiece multiple X objective lens/objective lens set The maximum optical magnification of the microscope depends on the wavelength of the light to which the object is illuminated. The size of the object that can be observed must be greater than the wavelength of the light. Otherwise, the light cannot be reflected or transmitted, or recognized by the human eye. The shortest wavelength of ultraviolet light is 0.2 microns, so the resolution of the optical microscope in the visible range does not exceed 0.2 microns, or 200 nanometers. This size is converted to the magnification of the microscope, and it is the optical magnification of 2000X. Usually, the compound microscope can achieve 100X objective lens, the eyepiece is 20X, and the magnification can reach 2000X. If it is bigger, it will be called "invalid magnification", that is, the image is large, but the resolution is no longer increased, and no more details and information can be seen. |
| Total magnification is the magnification of the observed object finally obtained by the instrument. This magnification is often the product of the optical magnification and the electronic magnification. When it is only optically magnified, the total magnification will be the optical magnification. Total magnification = optical magnification X electronic magnification Total magnification = (objective X photo eyepiece) X (display size / camera sensor target ) |
| Zoom in zoom microscope means to obtain different magnifications by changing the focal length of the objective lens within a certain range through adjustment of some lens or lens set while not changing the position of the object plane (that is, the plane of the point of the observed object perpendicular to the optical axis) and the image plane (that is, the plane of the image imaging focus and perpendicular to the optical axis) of the microscope. Zoom range refers to the range in which the magnification is from low to high. In the zoom range of the microscope, there is no need to adjust the microscope knob for focusing, and ensure that the image is always clear during the entire zoom process. The larger the zoom range, the stronger the adaptability of the range for microscope observation, but the image effects at both ends of the low and high magnification should be taken into consideration, the larger the zoom range, the more difficult to design and manufacture, and the higher the cost will be. |
| Zoom ratio is the ratio of the maximum magnification / the minimum magnification. Expressed as 1: (ratio of maximum magnification / minimum magnification). If the maximum magnification is 4.5X, the minimum magnification is 0.7X, then the zoom ratio = 4.5 / 0.7 = 6.4, the zoom ratio will be 1:6.4. Zoom ratio is obtained by the intermediate magnification group of the microscope. When the magnification is increased or decreased by using other objective lenses, the zoom ratio does not change accordingly. |
| When the microscope body changes the magnification, it is realized by adjusting the zoom drum or nosepiece. Generally, the lower case of the microscope is used as the zoom drum or nosepiece. When magnification conversion is required, it can be realized by turning the zoom drum or nosepiece. |
| In the body of zoom microscope, zooming is continuous. When rotating to a certain position, generally an integral multiple, a positioning structure or detent is added, which has a distinct hand feel during the zooming process, and stops at this position. When measuring, or testing by factory for unified standard magnification, a magnification detent device can avoid the error caused by the inaccurate multiple positioning of the optical magnification. |
| For microscopes of different manufacturers and different models, the thread size of their objectives may also be different. In general, the objective threads are available in two standard sizes, allowing similar objectives between different manufacturers to be used interchangeably. One is the British system: RMS type objective thread: 4/5in X 1/36in, One is metric: M25 X 0.75mm thread. |
| Throughout the focusing range, the track stand moves up and down along the guide rail through the focusing mechanism to achieve the purpose of focusing the microscope. This kind of structure is relatively stable, and the microscope is always kept moving up and down vertically along a central axis. When the focus is adjusted, it is not easy to shake, and there is no free sliding phenomenon. It is a relatively common and safe and reliable accessory. The size of the stand is generally small, flexible and convenient, and most of them are placed on the table for use, Therefore, together with the post stand, it is also called “desktop or table top stand". With regard to the height of the stand, most manufacturers usually do not make it very high. If the guide rail is long, it is easy to deform, and relatively more difficult . |
| The 76mm stand scope holder is the most popular microscope body adapter size, suitable for stereo microscopes produced by most manufacturers. Place the microscope body in a 76mm scope holder, tighten with screws to avoid shaking when the microscope is in use. Because this stand scope holder is very common, some special-sized microscopes can also borrow and use this stand, but only need a specific adapter to connect the microscope body with a diameter of less than 76mm. |
| Stand throat depth, also known as the throat depth, is an important parameter when selecting a microscope stand. When observing a relatively large object, a relatively large space is required, and a large throat depth can accommodate the object to move to the microscope observation center. |
| Different microscope bodies, different human operations, and different requirements for observation and operation, all require adjustment of the pre-tightening force of the stand that support microscope body. Facing the stand just right, use both hands to reverse the force to adjust the tightness. (face the knob of one side just right, clockwise is to tighten, counterclockwise is to loosen) In general, after long-time use, the knob will be loose, and adjustment is necessary. |
| Donut adapter is an adapter used to convert the scope holder of the microscope and the size of the microscope body. For different manufacturers and different types of microscopes, as well as different stands, their adapters are often different and not interchangeable. This type of donut adapter can be used to connect different microscope stands and microscope bodies, which is very convenient for interchange of different manufacturers and microscope models. It is usually to use this adapter cable to fix it to the body of the microscope, which is equivalent to changing the fixed diameter of the microscope, and then placing it on the microscope stand. |
| According to different objects to be observed, the appropriate platen should be selected. The microscope plate materials include black and white, black and white finish; transparent glass, frosted glass, metal, etc. Standard stands are generally configured with a suitable microscope plate, but different plates may need to be purchased separately. Black and white microscope plate are made of general plastics, and the different backgrounds in black and white make the object more prominent. Finish microscope plate eliminates reflections during observation. Transparent glass plate is used when observing transparent or translucent objects, and the use of transmitted light source is to make the light penetrate the object to be observed as much as possible. Finish glass plate, with its rough glass surface, can make the transmitted light more uniform and create a diffusing effect, avoiding exposure of the light shadow of the filament directly onto to the observed object. Metal plate, relatively more solid, is more suitable when it is necessary to operate and cut. Microscope plate is generally round shaped, on one side of the base there is a spring clip. When installing, align the plate with the clamp and push it in, and then press down the other end, so that the plate is smoothly embedded in to the circular card slot of the bottom plate. When removing, grab the other end of the clip, push and lift up the plate. |
| Fiber optic light source refers to an illuminating light source that does not contain or contains less spectrum of infrared heat radiation in a illuminating or light guiding body, for example, the popular LED light source, which is a typical illuminator fiber optic light source. In microscopic illumination, the optical fiber cold light source (commonly referred to as “cool light”) means that, after the illumination beam is transmitted through the optical fiber of the light guide body, the heat radiation is not brought to the light exit port, thereby achieving "cold light" effect. The portion of the illuminating light source of the optical fiber has been conventionally illuminated with a halogen light source. In recent years, high-power LED lighting has been widely used. Although the bulb of halogen light source can generate a lot of heat radiation, because of its high brightness when emitting light, it belongs to full-band light, with good color reproduction and comfortable observation by human eye, and therefore is still irreplaceable in some applications. Luminous light sources usually require a high-power light source to achieve strong light, therefore heat dissipation is very important. Whether it is a halogen light source or an LED light source, fan cooling is usually adopted. Fiber optic lighting application has many advantages: 1. The thermal conductivity of the optical fiber is poor. When the light source (light bulb) emits light, the thermal radiation, after being separated by the optical fiber, is not transmitted to the object to be observed. So, while maintaining the wavelength and brightness of the light, it becomes "cold light". When using strong light, cold light may not damage the observed objects, especially in medical and biological applications. 2. Single light source can be transmitted through the optical fiber, and at the same time there are multiple light-emitting points with the same light-emitting characteristics. The light-emitting port can be arranged at different positions and angles, or made into different shapes, such as double-branch lighting, ring lighting, multi-point lighting etc. 3. The light source host and the light exit port illumination point are transmitted through the optical fiber, and therefore the host can be placed in a safe or suitable position without affecting the illumination position of the light exit port, so that there will be more flexibility in design and use. 4. The light exiting port illumination point is transmitted through the optical fiber, and it can filter freely the wavelength of the light at the light source position in the front end of the light entrance, increase the polarization effect, and adjust the brightness and darkness. For example, improve the contrast and contrast ratio of the details of the object to be observed through various color filters, filter out the ultraviolet and infrared light, and reduce damage to certain items.. 5. In the light source host and optical fiber used in fiber optic lighting, the service life of the optical fiber can be decades, and the design separating the light source from the optical fiber makes the light source easy to repair and replace. |
| The brightness of the light source adjustable is very important in the imaging of the microscope. Since the difference of the numerical aperture of the objective lens of high magnification and low magnification is very big, more incident light is needed to achieve a much better resolution when using a high magnification objective lens. Therefore, when observing through a high magnification objective lens, the brightness required is high; when observing through a low magnification objective lens, the brightness required is low. When observing different objects, or feature points of the same object at different positions, the brightness needs are also different; including the difference of background light or reflection within the field of view of observation, it has a great influence on the effect of observing the object, and therefore one needs to adjust the brightness of the light source according to each object to be observed. In the light source capable of providing continuous spectrum, such as a halogen lamp, the brightness adjustment of the light not only adjusts the brightness and intensity of the light, but also changes the spectrum emitted by the light source. When the light source is dark, there are many components of red light, and when the brightness is high, there are more blue spectrum. If the required light is strong and the spectrum needs to be changed, the light can be kept at a brighter intensity, which is solved by adjusting the spectrum by adding a color filter. Take note of the dimming button on the light source, after the On/Off switch is turned on, normally clockwise is to brighten, and counterclockwise is to darken. If it is adjusted to the lowest brightness, the light source should normally be lit. If the naked eye still can't see the object being illuminated brightly, you need to adjust the brightness knob to a much bigger position. Generally, there is scale marking on the dimming knob, which is an imaginary number representing the percentage of brightness, or an electronic digital display, giving the brightness of the light source under the same conditions a marking. |
| Optical fiber bundle for illumination, is referred to as optical fiber light guide for short. Optical fiber light guide is a fiber core made of transparent material (typically, glass fiber is made of silicon dioxide). Around the fiber core, a cladding layer is formed, using a material having a refractive index lower than that of the fiber core, that is, if the refractive index of the fiber core and the cladding layer are n1 and n2, then n1 must be >n2. The transmission of the optical fiber makes use of the principle of total reflection of light. In this fiber core medium, light is to maintain its characteristics of optical waveform for transmission, wherein the fiber core portion of high refractive index is the main channel for light transmission, while the outer casing of low refractive index covers the entire fiber core. Since the core has a higher refractive index than the outer casing, total reflection occurs, and therefore light can be transmitted in the fiber core. The core of the optical fiber is generally classified into glass fiber, quartz fiber, plastic fiber, and liquid core fiber etc. Microscope illumination usually uses glass fiber, which can have better transmittance for light of different wavelengths. For glass fiber, its optical core material is multi-component optical glass with high refractive index, whereas its cladding material is optical glass with low refractive index. The commonly used multi-component glass formula include: sodium-borosilicate glass (Na-B-Si), potassium-borosilicate glass (K-B-Si), sodium-zinc aluminoborosilicate glass (Na-Zn-Al-B-Si), and the like. Glass fiber, made of optical glass, has a much higher transparency than a ordinary set of glass, but still has a relatively high attenuation value, generally about 1dB/m. The lighting fiber optic wire is very thin, and cannot be bent at a large angle. Generally, its minimum bending radius ≥30D (Min. bending radius ≥30D). Check the breaking of the fiber optic wire, you can use one side section to face the light, and the other side section to see the dark part. If there is too much break, it can’t be repaired, but the entire fiber be replaced. |
| Coupler/C-mount adapter is an adapter commonly used for connection between the C-adapter camera (industrial camera) and a microscope. |
| Different coupler/C-mount-adapters are suitable for different microscopes. For some, some adapter accessories need to be replaced. See the applicable range of each coupler/C-mount-adapter for details. |
| Coupler magnification refers to the line field magnification of the coupler/C-mount-adapter. With different magnifications of the adapter lens, images of different magnifications and fields of view can be obtained. The size of the image field of view is related to the sensor size and the coupler/C-mount-adapter magnification. Camera image field of view (mm) = sensor diagonal / coupler/C-mount-adapter magnification. For example: 1/2 inch sensor size, 0.5X coupler/C-mount-adapter coupler, field of view FOV (mm) = 8mm / 0.5 = 16mm. The field of view number of the microscope 10X eyepiece is usually designed to be 18, 20, 22, 23mm, less than 1 inch (25.4mm). Since most commonly used camera sensor sizes are 1/3 and 1/2 inches, this makes the image field of view on the display always smaller than the field of view of the eyepiece for observation, and the visual perception becomes inconsistent when simultaneously viewed on both the eyepiece and the display. If it is changed to a 0.5X coupler/C-mount-adapter, the microscope image magnification is reduced by 1/2 and the field of view is doubled, then the image captured by the camera will be close to the range observed in the eyepiece. Some adapters are designed without a lens, and their optical magnification is considered 1X. |
| For the size of the lens field of view of the coupler/C-mount-adapter, in the design process, the size of the camera sensor imaging target should be considered. When the field of view of the lens is smaller than the target plane of the camera, “black border” and “dark corner” will appear. The general microscope coupler/C-mount adapters are generally designed for the 1/2" camera targets. When a camera of 2/3 or larger target is used, the “dark corner” phenomenon will appear in the field of view. Especially, at present, DSLR cameras generally use large target plane design (1 inch full field of view), when used for microscopic photographing, the general DSLR camera coupler/C-mount adapter will have “black border”. Generally, the “dark corner” that appears on the field of view is often that the center of the microscope and the camera are not aligned. Adjust the position of the screw on the camera adapter, or turn the camera adapter to adjust or change the effect. |
| At present, the coupler/C-mount adapter generally adopts the C/CS-Mount adapter to match with the industrial camera. For details, please refer to "Camera Lens Mount". |
| The camera outputs digital signals, which are output to the display through the HDMI adapter. There are usually two types of HDMI adapters, namely, HDMI A type adapter, and HDMI Mini type adapter. |
| CMOS, or complementary metal oxide semiconductor. Both CMOS and CCD sensors have their own respective advantages and disadvantages. As a kind of photoelectric conversion sensor, among the current cameras, CMOS is relatively more widely used. |
 |
| The size of the CCD and CMOS image sensors is the size of the photosensitive device. The larger the area of the photosensitive device, the larger the CCD/CMOS area; the more photons are captured, the better the photographic performance; the higher the signal-to-noise ratio, the larger the photosensitive area, and the better the imaging effect. The size of the image sensor needs to match the size of the microscope's photographic eyepiece; otherwise, black borders or dark corners will appear within the field of view of observation. |
| The pixel is determined by the number of photosensitive elements on the photoelectric sensor of the camera, and one photosensitive element corresponds to one pixel. Therefore, the more photosensitive elements, the larger the number of pixels; the better the imaging quality of the camera, and the higher the corresponding cost. The pixel unit is one, for example, 1.3 million pixels means 1.3 million pixels points, expressed as 1.3MP (Megapixels). |
| Resolution of the camera refers to the number of pixels accommodated within unit area of the image sensor of the camera. Image resolution is not represented by area, but by the number of pixels accommodated within the unit length of the rectangular side. The unit of length is generally represented by inch. |
 |
| Digital signals output: USB 2.0, USB3.0; 15 Pin VGA; Firewire Port; HDMI; VGA; Camera Link etc. Analog signal output: BNC; RCA; Y-C etc. In addition, some cameras store and output images in the form of a memory card. Usually, industrial cameras often have several output modes on one camera for convenience purposes. |
| Industrial camera adapters are usually available in three types: 1. C-Mount: 1" diameter with 32 threads per inch, flange back intercept 17.5mm. 2. CS-Mount: 1" diameter with 32 threads per inch, flange back intercept 12.5mm. CS-Mount can be converted to a C-Mount through a 5mm spacer, C-mount industrial camera cannot use the CS-mount lens. 3. F-Mount: F-mount is the adapter standard of Nikon lens, also known as Nikon mouth, usually used on large-sized sensor cameras, the flange back intercept is 46.5mm. |
| Frame rate is the number of output of frames per second, FPS or Hertz for short. The number of frames per second (fps) or frame rate represents the number of times the graphics process is updated per second. Due to the physiological structure of the human eye, when the frame rate of the picture is higher than 16fps, it is considered to be coherent, and high frame rate can make the image frame more smooth and realistic. Some industrial inspection camera applications also require a much higher frame rate to meet certain specific needs. The higher the resolution of the camera, the lower the frame rate. Therefore, this should be taken into consideration during their selection. When needing to take static or still images, you often need a large resolution. When needing to operate under the microscope, or shooting dynamic images, frame rate should be first considered. In order to solve this problem, the general industrial camera design is to display the maximum frame rate and relatively smaller resolution when viewing; when shooting, the maximum resolution should be used; and some cameras need to set in advance different shooting resolutions when taking pictures, so as to achieve the best results. |
| White balance is an indicator that describes the precision of white color generated in the image when the three primary colors of red, green and blue are mixed, which accurately reflects the color condition of the subject. There are manual white balance and automatic white balance. White balance of the camera is to "restore white objects to white color under any light source." The chromatic aberration phenomenon occurred under different light sources is compensated by enhancing the corresponding complementary color. Automatic white balance can generally be used, but under certain conditions if the hue is not ideal, options of other white balance may be selected. |
| Camera crosshairs refers to the preset reference line within the camera, which is used to calibrate various positions on the display. The most commonly used is the crosshair, which is to determine the center position of the camera image, and it is very important in measurement. Some cameras also have multiple crosshairs that can be moved to quickly detect and calibrate the size of the object being viewed. Some crosshairs can also change color to adapt to different viewing backgrounds. |
| After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection. For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem. |
| Video Microscope Optical Data Sheet | |||||
| P/N | Objective | Coupler | |||
| MZ07016131 (0.5X) | MZ07016181 (0.67X) | MZ07016151 (1X) | MZ07016171 (2X) | ||
| Magnification | Magnification | Magnification | Magnification | ||
| MZ07014211 | 0.5X | 0.18-1.12X | 0.23-1.51X | 0.35-2.25X | 0.7-4.5X |
| MZ07014311 | 0.75X | 0.26-1.69X | 0.35-2.26X | 0.52-3.38X | 1.05-6.75X |
| MZ07014511 | 1.5X | 0.52-3.38X | 0.7-4.52X | 1.05-6.75X | 2.1-13.5X |
| MZ07014611 | 2X | 0.7-4.5X | 0.94-6.03X | 1.4-9X | 2.8-18X |
| 1. Magnification=Objective Optical Magnification * Body Magnification * Coupler Magnification | |||||
| Camera Image Sensor Specifications | |||
| No. | Camera Image Sensor Size | Camera image Sensor Diagonal | |
| （mm） | （inch） | ||
| 1 | 1/4 in. | 4mm | 0.157" |
| 2 | 1/3 in. | 6mm | 0.236" |
| 3 | 1/2.8 in. | 6.592mm | 0.260" |
| 4 | 1/2.86 in. | 6.592mm | 0.260" |
| 5 | 1/2.7 in. | 6.718mm | 0.264" |
| 6 | 1/2.5 in. | 7.182mm | 0.283" |
| 7 | 1/2.3 in. | 7.7mm | 0.303" |
| 8 | 1/2.33 in. | 7.7mm | 0.303" |
| 9 | 1/2 in. | 8mm | 0.315" |
| 10 | 1/1.9 in. | 8.933mm | 0.352" |
| 11 | 1/1.8 in. | 8.933mm | 0.352" |
| 12 | 1/1.7 in. | 9.5mm | 0.374" |
| 13 | 2/3 in. | 11mm | 0.433" |
| 14 | 1/1.2 in. | 12.778mm | 0.503" |
| 15 | 1 in. | 16mm | 0.629" |
| 16 | 1/1.1 in. | 17.475mm | 0.688" |
| Digital Magnification Data Sheet | |||||||||
| Image Sensor Size | Image Sensor Diagonal size | Monitor | |||||||
| Screen Size (13.3in) | Screen Size (10in) | Screen Size (11.6in) | Screen Size (13.3in) | Screen Size (11.6in) | Screen Size (21.5in) | Screen Size (11.6in) | Screen Size (21.5in) | ||
| Digital Zoom Function | Digital Zoom Function | Digital Zoom Function | Digital Zoom Function | Digital Zoom Function | Digital Zoom Function | Digital Zoom Function | Digital Zoom Function | ||
| 1/2.86 in. | 6.592mm | 51.2 | 38.5 | 44.7 | 51.2 | 44.7 | 82.8 | 44.7 | 82.8 |
| 1. Digital Zoom Function= (Screen Size * 25.4) / Image Sensor Diagonal size | |||||||||
| Microscope Optical and Digital Magnifications Data Sheet | ||||||||||
| Objective | Coupler | Camera | Monitor | Video Microscope Optical Magnifications | Digital Zoom Function | Total Magnification | Field of View (mm) | |||
| PN | Magnification | PN | Magnification | Image Sensor Size | Image Sensor Diagonal size | Screen Size | ||||
| MZ07014211 | 0.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 10in | 0.18-1.12X | 38.5 | 6.93-43.12X | 5.89-36.62mm |
| MZ07014211 | 0.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.18-1.12X | 44.7 | 8.05-50.06X | 5.89-36.62mm |
| MZ07014211 | 0.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 13.3in | 0.18-1.12X | 51.2 | 9.22-57.34X | 5.89-36.62mm |
| MZ07014211 | 0.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.18-1.12X | 44.7 | 8.05-50.06X | 5.89-36.62mm |
| MZ07014211 | 0.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 21.5in | 0.18-1.12X | 82.8 | 14.9-92.74X | 5.89-36.62mm |
| MZ07014211 | 0.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.18-1.12X | 44.7 | 8.05-50.06X | 5.89-36.62mm |
| MZ07014211 | 0.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 21.5in | 0.18-1.12X | 82.8 | 14.9-92.74X | 5.89-36.62mm |
| MZ07014211 | 0.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 10in | 0.23-1.51X | 38.5 | 8.86-58.14X | 4.37-28.66mm |
| MZ07014211 | 0.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.23-1.51X | 44.7 | 10.28-67.5X | 4.37-28.66mm |
| MZ07014211 | 0.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 13.3in | 0.23-1.51X | 51.2 | 11.78-77.31X | 4.37-28.66mm |
| MZ07014211 | 0.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.23-1.51X | 44.7 | 10.28-67.5X | 4.37-28.66mm |
| MZ07014211 | 0.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 21.5in | 0.23-1.51X | 82.8 | 19.04-125.03X | 4.37-28.66mm |
| MZ07014211 | 0.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.23-1.51X | 44.7 | 10.28-67.5X | 4.37-28.66mm |
| MZ07014211 | 0.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 21.5in | 0.23-1.51X | 82.8 | 19.04-125.03X | 4.37-28.66mm |
| MZ07014211 | 0.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 10in | 0.35-2.25X | 38.5 | 13.48-86.62X | 2.93-18.83mm |
| MZ07014211 | 0.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 0.35-2.25X | 44.7 | 15.64-100.58X | 2.93-18.83mm |
| MZ07014211 | 0.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 13.3in | 0.35-2.25X | 51.2 | 17.92-115.2X | 2.93-18.83mm |
| MZ07014211 | 0.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 0.35-2.25X | 44.7 | 15.64-100.58X | 2.93-18.83mm |
| MZ07014211 | 0.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 21.5in | 0.35-2.25X | 82.8 | 28.98-186.3X | 2.93-18.83mm |
| MZ07014211 | 0.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 0.35-2.25X | 44.7 | 15.64-100.58X | 2.93-18.83mm |
| MZ07014211 | 0.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 21.5in | 0.35-2.25X | 82.8 | 28.98-186.3X | 2.93-18.83mm |
| MZ07014211 | 0.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 10in | 0.7-4.5X | 38.5 | 26.95-173.25X | 1.46-9.42mm |
| MZ07014211 | 0.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 0.7-4.5X | 44.7 | 31.29-201.15X | 1.46-9.42mm |
| MZ07014211 | 0.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 13.3in | 0.7-4.5X | 51.2 | 35.84-230.4X | 1.46-9.42mm |
| MZ07014211 | 0.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 0.7-4.5X | 44.7 | 31.29-201.15X | 1.46-9.42mm |
| MZ07014211 | 0.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 21.5in | 0.7-4.5X | 82.8 | 57.96-372.6X | 1.46-9.42mm |
| MZ07014211 | 0.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 0.7-4.5X | 44.7 | 31.29-201.15X | 1.46-9.42mm |
| MZ07014211 | 0.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 21.5in | 0.7-4.5X | 82.8 | 57.96-372.6X | 1.46-9.42mm |
| MZ07014311 | 0.75X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 10in | 0.26-1.69X | 38.5 | 10.01-65.06X | 3.9-25.35mm |
| MZ07014311 | 0.75X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.26-1.69X | 44.7 | 11.62-75.54X | 3.9-25.35mm |
| MZ07014311 | 0.75X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 13.3in | 0.26-1.69X | 51.2 | 13.31-86.53X | 3.9-25.35mm |
| MZ07014311 | 0.75X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.26-1.69X | 44.7 | 11.62-75.54X | 3.9-25.35mm |
| MZ07014311 | 0.75X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 21.5in | 0.26-1.69X | 82.8 | 21.53-139.93X | 3.9-25.35mm |
| MZ07014311 | 0.75X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.26-1.69X | 44.7 | 11.62-75.54X | 3.9-25.35mm |
| MZ07014311 | 0.75X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 21.5in | 0.26-1.69X | 82.8 | 21.53-139.93X | 3.9-25.35mm |
| MZ07014311 | 0.75X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 10in | 0.35-2.26X | 38.5 | 13.48-87.01X | 2.92-18.83mm |
| MZ07014311 | 0.75X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.35-2.26X | 44.7 | 15.64-101.02X | 2.92-18.83mm |
| MZ07014311 | 0.75X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 13.3in | 0.35-2.26X | 51.2 | 17.92-115.71X | 2.92-18.83mm |
| MZ07014311 | 0.75X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.35-2.26X | 44.7 | 15.64-101.02X | 2.92-18.83mm |
| MZ07014311 | 0.75X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 21.5in | 0.35-2.26X | 82.8 | 28.98-187.13X | 2.92-18.83mm |
| MZ07014311 | 0.75X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.35-2.26X | 44.7 | 15.64-101.02X | 2.92-18.83mm |
| MZ07014311 | 0.75X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 21.5in | 0.35-2.26X | 82.8 | 28.98-187.13X | 2.92-18.83mm |
| MZ07014311 | 0.75X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 10in | 0.52-3.38X | 38.5 | 20.02-130.13X | 1.95-12.68mm |
| MZ07014311 | 0.75X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 0.52-3.38X | 44.7 | 23.24-151.09X | 1.95-12.68mm |
| MZ07014311 | 0.75X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 13.3in | 0.52-3.38X | 51.2 | 26.62-173.06X | 1.95-12.68mm |
| MZ07014311 | 0.75X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 0.52-3.38X | 44.7 | 23.24-151.09X | 1.95-12.68mm |
| MZ07014311 | 0.75X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 21.5in | 0.52-3.38X | 82.8 | 43.06-279.86X | 1.95-12.68mm |
| MZ07014311 | 0.75X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 0.52-3.38X | 44.7 | 23.24-151.09X | 1.95-12.68mm |
| MZ07014311 | 0.75X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 21.5in | 0.52-3.38X | 82.8 | 43.06-279.86X | 1.95-12.68mm |
| MZ07014311 | 0.75X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 10in | 1.05-6.75X | 38.5 | 40.43-259.88X | 0.98-6.28mm |
| MZ07014311 | 0.75X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 1.05-6.75X | 44.7 | 46.94-301.73X | 0.98-6.28mm |
| MZ07014311 | 0.75X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 13.3in | 1.05-6.75X | 51.2 | 53.76-345.6X | 0.98-6.28mm |
| MZ07014311 | 0.75X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 1.05-6.75X | 44.7 | 46.94-301.73X | 0.98-6.28mm |
| MZ07014311 | 0.75X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 21.5in | 1.05-6.75X | 82.8 | 86.94-558.9X | 0.98-6.28mm |
| MZ07014311 | 0.75X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 1.05-6.75X | 44.7 | 46.94-301.73X | 0.98-6.28mm |
| MZ07014311 | 0.75X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 21.5in | 1.05-6.75X | 82.8 | 86.94-558.9X | 0.98-6.28mm |
| MZ07014511 | 1.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 10in | 0.52-3.38X | 38.5 | 20.02-130.13X | 1.95-12.68mm |
| MZ07014511 | 1.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.52-3.38X | 44.7 | 23.24-151.09X | 1.95-12.68mm |
| MZ07014511 | 1.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 13.3in | 0.52-3.38X | 51.2 | 26.62-173.06X | 1.95-12.68mm |
| MZ07014511 | 1.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.52-3.38X | 44.7 | 23.24-151.09X | 1.95-12.68mm |
| MZ07014511 | 1.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 21.5in | 0.52-3.38X | 82.8 | 43.06-279.86X | 1.95-12.68mm |
| MZ07014511 | 1.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.52-3.38X | 44.7 | 23.24-151.09X | 1.95-12.68mm |
| MZ07014511 | 1.5X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 21.5in | 0.52-3.38X | 82.8 | 43.06-279.86X | 1.95-12.68mm |
| MZ07014511 | 1.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 10in | 0.7-4.52X | 38.5 | 26.95-174.02X | 1.46-9.42mm |
| MZ07014511 | 1.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.7-4.52X | 44.7 | 31.29-202.04X | 1.46-9.42mm |
| MZ07014511 | 1.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 13.3in | 0.7-4.52X | 51.2 | 35.84-231.42X | 1.46-9.42mm |
| MZ07014511 | 1.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.7-4.52X | 44.7 | 31.29-202.04X | 1.46-9.42mm |
| MZ07014511 | 1.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 21.5in | 0.7-4.52X | 82.8 | 57.96-374.26X | 1.46-9.42mm |
| MZ07014511 | 1.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.7-4.52X | 44.7 | 31.29-202.04X | 1.46-9.42mm |
| MZ07014511 | 1.5X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 21.5in | 0.7-4.52X | 82.8 | 57.96-374.26X | 1.46-9.42mm |
| MZ07014511 | 1.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 10in | 1.05-6.75X | 38.5 | 40.43-259.88X | 0.98-6.28mm |
| MZ07014511 | 1.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 1.05-6.75X | 44.7 | 46.94-301.73X | 0.98-6.28mm |
| MZ07014511 | 1.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 13.3in | 1.05-6.75X | 51.2 | 53.76-345.6X | 0.98-6.28mm |
| MZ07014511 | 1.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 1.05-6.75X | 44.7 | 46.94-301.73X | 0.98-6.28mm |
| MZ07014511 | 1.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 21.5in | 1.05-6.75X | 82.8 | 86.94-558.9X | 0.98-6.28mm |
| MZ07014511 | 1.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 1.05-6.75X | 44.7 | 46.94-301.73X | 0.98-6.28mm |
| MZ07014511 | 1.5X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 21.5in | 1.05-6.75X | 82.8 | 86.94-558.9X | 0.98-6.28mm |
| MZ07014511 | 1.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 10in | 2.1-13.5X | 38.5 | 80.85-519.75X | 0.49-3.14mm |
| MZ07014511 | 1.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 2.1-13.5X | 44.7 | 93.87-603.45X | 0.49-3.14mm |
| MZ07014511 | 1.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 13.3in | 2.1-13.5X | 51.2 | 107.52-691.2X | 0.49-3.14mm |
| MZ07014511 | 1.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 2.1-13.5X | 44.7 | 93.87-603.45X | 0.49-3.14mm |
| MZ07014511 | 1.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 21.5in | 2.1-13.5X | 82.8 | 173.88-1117.8X | 0.49-3.14mm |
| MZ07014511 | 1.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 2.1-13.5X | 44.7 | 93.87-603.45X | 0.49-3.14mm |
| MZ07014511 | 1.5X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 21.5in | 2.1-13.5X | 82.8 | 173.88-1117.8X | 0.49-3.14mm |
| MZ07014611 | 2X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 10in | 0.7-4.5X | 38.5 | 26.95-173.25X | 1.46-9.42mm |
| MZ07014611 | 2X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.7-4.5X | 44.7 | 31.29-201.15X | 1.46-9.42mm |
| MZ07014611 | 2X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 13.3in | 0.7-4.5X | 51.2 | 35.84-230.4X | 1.46-9.42mm |
| MZ07014611 | 2X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.7-4.5X | 44.7 | 31.29-201.15X | 1.46-9.42mm |
| MZ07014611 | 2X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 21.5in | 0.7-4.5X | 82.8 | 57.96-372.6X | 1.46-9.42mm |
| MZ07014611 | 2X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 11.6in | 0.7-4.5X | 44.7 | 31.29-201.15X | 1.46-9.42mm |
| MZ07014611 | 2X | MZ07016131 | 0.5X | 1/2.86 in. | 6.592mm | 21.5in | 0.7-4.5X | 82.8 | 57.96-372.6X | 1.46-9.42mm |
| MZ07014611 | 2X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 10in | 0.94-6.03X | 38.5 | 36.19-232.16X | 1.09-7.01mm |
| MZ07014611 | 2X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.94-6.03X | 44.7 | 42.02-269.54X | 1.09-7.01mm |
| MZ07014611 | 2X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 13.3in | 0.94-6.03X | 51.2 | 48.13-308.74X | 1.09-7.01mm |
| MZ07014611 | 2X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.94-6.03X | 44.7 | 42.02-269.54X | 1.09-7.01mm |
| MZ07014611 | 2X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 21.5in | 0.94-6.03X | 82.8 | 77.83-499.28X | 1.09-7.01mm |
| MZ07014611 | 2X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 11.6in | 0.94-6.03X | 44.7 | 42.02-269.54X | 1.09-7.01mm |
| MZ07014611 | 2X | MZ07016181 | 0.67X | 1/2.86 in. | 6.592mm | 21.5in | 0.94-6.03X | 82.8 | 77.83-499.28X | 1.09-7.01mm |
| MZ07014611 | 2X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 10in | 1.4-9X | 38.5 | 53.9-346.5X | 0.73-4.71mm |
| MZ07014611 | 2X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 1.4-9X | 44.7 | 62.58-402.3X | 0.73-4.71mm |
| MZ07014611 | 2X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 13.3in | 1.4-9X | 51.2 | 71.68-460.8X | 0.73-4.71mm |
| MZ07014611 | 2X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 1.4-9X | 44.7 | 62.58-402.3X | 0.73-4.71mm |
| MZ07014611 | 2X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 21.5in | 1.4-9X | 82.8 | 115.92-745.2X | 0.73-4.71mm |
| MZ07014611 | 2X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 11.6in | 1.4-9X | 44.7 | 62.58-402.3X | 0.73-4.71mm |
| MZ07014611 | 2X | MZ07016151 | 1X | 1/2.86 in. | 6.592mm | 21.5in | 1.4-9X | 82.8 | 115.92-745.2X | 0.73-4.71mm |
| MZ07014611 | 2X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 10in | 2.8-18X | 38.5 | 107.8-693X | 0.37-2.35mm |
| MZ07014611 | 2X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 2.8-18X | 44.7 | 125.16-804.6X | 0.37-2.35mm |
| MZ07014611 | 2X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 13.3in | 2.8-18X | 51.2 | 143.36-921.6X | 0.37-2.35mm |
| MZ07014611 | 2X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 2.8-18X | 44.7 | 125.16-804.6X | 0.37-2.35mm |
| MZ07014611 | 2X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 21.5in | 2.8-18X | 82.8 | 231.84-1490.4X | 0.37-2.35mm |
| MZ07014611 | 2X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 11.6in | 2.8-18X | 44.7 | 125.16-804.6X | 0.37-2.35mm |
| MZ07014611 | 2X | MZ07016171 | 2X | 1/2.86 in. | 6.592mm | 21.5in | 2.8-18X | 82.8 | 231.84-1490.4X | 0.37-2.35mm |
| 1. Video Microscope Optical Magnifications=Objective Optical Magnification * Body Magnification * Coupler Magnification | ||||||||||
| 2. Digital Zoom Function= (Screen Size * 25.4) / Image Sensor Diagonal size | ||||||||||
| 3. Total Magnification= Video Microscope Optical Magnifications * (Screen Size * 25.4) / Image Sensor Diagonal size | ||||||||||
| 4. Field of View (mm)= Image Sensor Diagonal size / Video Microscope Optical Magnifications | ||||||||||
| Contains | ||||||||||||||||||||||||||||
| Parts Including | ||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||
| Packing | |
| Packaging Type | Carton Packaging |
| Packaging Material | Corrugated Carton |
| Packaging Dimensions(1) | 36x30x40cm (14.173x11.811x15.748″) |
| Packaging Dimensions(2) | 15.2x15.2x15.2cm (6x6x6″) |
| Packaging Dimensions(3) | 15.2x15.2x15.2cm (6x6x6″) |
| Packaging Dimensions(4) | 28x23x7cm (11.024x9.055x2.756″) |
| Packaging Dimensions(5) | 37x24x9.5cm (14.566x9.448x3.74″) |
| Packaging Dimensions(6) | 23x22.5x4cm (9.055x8.858x1.575″) |
| Packaging Dimensions(7) | 25.5x15.5x25.5cm (10.039x6.102x10.039″) |
| Inner Packing Material | Plastic Bag |
| Ancillary Packaging Materials | Expanded Polystyrene |
| Gross Weight | 3.75kg (8.27lbs) |
| Minimum Packaging Quantity | 1pc |
| Transportation Carton | Carton Packaging |
| Transportation Carton Material | Corrugated Carton |
| Transportation Carton Dimensions(1) | 36x30x40cm (14.173x11.811x15.748″) |
| Transportation Carton Dimensions(2) | 15.2x15.2x15.2cm (6x6x6″) |
| Transportation Carton Dimensions(3) | 15.2x15.2x15.2cm (6x6x6″) |
| Transportation Carton Dimensions(4) | 28x23x7cm (11.024x9.055x2.756″) |
| Transportation Carton Dimensions(5) | 37x24x9.5cm (14.566x9.448x3.74″) |
| Transportation Carton Dimensions(6) | 23x22.5x4cm (9.055x8.858x1.575″) |
| Transportation Carton Dimensions(7) | 25.5x15.5x25.5cm (10.039x6.102x10.039″) |
| Total Gross Weight of Transportation(kilogram) | 10.7 |
| Total Gross Weight of Transportation(pound) | 23.589 |
| Quantity of One Transportation Carton | 7pc |
