Microscope Post Stand, 50mm Coarse Focus Rack

1 Year
  • Microscope Post Stand, 50mm Coarse Focus Rack
  • Microscope Post Stand, 50mm Coarse Focus Rack
  • Microscope Post Stand, 50mm Coarse Focus Rack
  • Microscope Post Stand, 50mm Coarse Focus Rack
  • Microscope Post Stand, 50mm Coarse Focus Rack
  • Microscope Post Stand, 50mm Coarse Focus Rack
& Free shipping * Contiguous USA Only
In Stock
Other Shipping Options

Quick Overview
Post Stand. Dia. 50mm Scope Holder. Vertical Post Height: 280mm. Vertical Post Diameter: Dia. 25mm. Base Dimensions: 380x260x20mm. Coarse Focus. Focus Distance: 60mm. Post Hole Diameter of Focusing Rack: Dia. 25mm.

ST19011501 50mm Post Stand
Post Stand
Stand TypePost Stand
Holder Adapter Type Dia. 50mm Scope Holder
Vertical Post Height280mm
Vertical Post Diameter Dia. 25mm
Base TypeTable Base
Base ShapeRectangle
Base Dimensions380x260x20mm
Focus ModeManual
Focus Distance60mm
Coarse Focus Distance per Rotation26mm
Center Distance from Hole to Scope Holder150mm
Surface TreatmentElectroplating Black
Net Weight3.55kg (7.83lbs)
Dimensions380x260x370mm (14.961x10.236x14.567 in. )
Focus Rack
50/25mm Through Hole Focus Rack
Holder Adapter Type Dia. 50mm Scope Holder
Focus ModeManual
Coarse/Fine Focus TypeCoarse Focus
Focus Distance60mm
Coarse Focus Distance per Rotation30mm
Post Hole Diameter of Focusing Rack Dia. 25mm
Center Distance from Hole to Scope Holder142mm
Surface TreatmentSpray Paint
Net Weight0.85kg (1.87lbs)


Technical Info

Microscope StandClose Λ
Microscope stand have many options depending on the needs, especially stereo microscope stand, there are several factors to consider before choosing:
Stability: microscope stand is used to prop up the microscope body. The stand should be selected according to the size of the microscope mainframe. The stability of the stand determines the stability of the microscope in use, and its various adapters and screws must be tightly locked.
Volume size: limited by the working environment and space of the workbench.
Workspace and scope: the size of the workspace of the object being observed and the height of the object being observed should be considered.
Choice of lighting: some stands are equipped with a light source, but some are not, depending on whether there are conditions to add additional lighting.

Operational requirements:
1. Install the stand as required.
2. Arrange a reasonable fixed position for the stand.
3. Carefully tighten the microscope mainframe.
4. Arrange the location of the additional light source reasonably, and place the electric wire in a position that does not interfere with the work.
5. Connect the various kinds of peripheral devices, such as cameras, monitors, computers and so on.
Post StandClose Λ
Post stand generally has relatively tall post. When the focus is adjusted, the focusing mechanism can slide up and down the post, the microscope is thus placed in an approximately focused position, and then the focusing mechanism makes fine and accurate adjustment. This kind of stand can move quickly, and is suitable for viewing objects with a higher height and bigger volume.
After the microscope is mounted, the microscope imaging center needs to be aligned with the center of the platen.
The focusing mechanism button on the post must be tightened to lock the guard ring device, and the microscope should be prevented from loosening and shaking when working. When it is necessary to adjust the height, hold the microscope and the focusing mechanism with one hand, then release the knob, adjust it to the proper position, lock the knob, then top the guard ring to the lower position of the focusing mechanism, and lock it tight. In particular, avoid accidental dropping of the microscope due to gravity, thereby damaging the microscope and the objects below.
Focus RackClose Λ
Focus rack is the focusing mechanism that connects the microscope, with one end connected to the post of the microscope stand to adjust the up and down movement of the microscope for focusing.
The front end of the focus rack can also be used to connect microscopes or cameras of different diameters by changing the scope holder.
PackagingClose Λ
After unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection.
For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.

More Info

Parts Including
SA1904110150/25mm Through Hole Focus Rack
Packaging TypeCarton Packaging
Packaging MaterialCorrugated Carton
Packaging Dimensions(1)44.5x32.5x23cm (17.520x12.795x9.055″)
Inner Packing MaterialPlastic Bag
Ancillary Packaging MaterialsExpanded Polystyrene
Gross Weight4.15kg (9.15lbs)
Minimum Packaging Quantity1pc
Transportation CartonCarton Packaging
Transportation Carton MaterialCorrugated Carton
Transportation Carton Dimensions(1)44.5x32.5x23cm (17.520x12.795x9.055″)
Total Gross Weight of Transportation(kilogram)4.15
Total Gross Weight of Transportation(pound)9.15

Related Products